What to Do If Simmons Rangefinder Gets Wet? – Detailed Guide

People often ask, what to do if Simmons rangefinder gets wet?

Let’s find out!

What to Do if Simmons Rangefinder Gets Wet?

Simmons rangefinders are waterproof. That means that they can be used in the rain, but you should still take precautions when using them in wet conditions. If your rangefinder gets wet, it will not work properly and may even damage itself. Here’s what to do if your rangefinder gets wet:

1. Turn off the power switch. You don’t want to accidentally turn on the rangefinder while it is wet.
2. Remove the batteries from the rangefinder. This will prevent any short circuits or other problems caused by water getting into the battery compartment.
3. Let the rangefinder dry completely before putting it back together.
4. Make sure that the rangefinder has dried completely before turning it back on.
5. Check for leaks around the lens cover. If there are any leaks, use a cotton swab to remove any moisture.
6. Clean the lenses with a soft cloth. Use only clean, lint-free clothes. Don’t use alcohol wipes or paper towels because these materials could leave residue on the lenses.
7. Replace the batteries after cleaning the lenses.
8. Put the rangefinder back together.
9. Test the rangefinder again to make sure that everything works correctly.

How to Clean a Golf Rangefinder?

Keeping a clean rangefinder enhances performance. But cleaning it is an uphill task.

First, you need to switch it off. Switching the device off involves a few steps, albeit simple.

Press the power switch for a few seconds until the device shuts down.

After closing it down, take out any removable components such as SD cards and batteries. These can then be cleaned easily. Rubber components should also be removed if possible. This helps make cleaning easier.

It also helps keep these parts away from any cleaning products. You need the right tool for each part of the rangefinder. Most golf rangefinders come with a cleaning brush.

Don’t worry if you don’t have one; simply use a clean microfiber cloth. Also, you may want to use an appropriate cleaning agent.

A used toothbrush comes in handy when cleaning hard-to-get-at spots.

When using contact lenses, be careful not to use too strong an agent or cleaner. You can clean your own eyes by yourself.

You could even create your tool for that purpose. However, be careful not to damage any important parts by using hard or rough objects.

If you want to remove stubborn dirt from your clothes, you can either wash them again or rub them against something rough, like sandpaper or a piece of cloth.

Be gentle when cleaning sensitive small parts

Be gentle throughout the process. Using the tip of your nails to peel out stains isn’t a bad idea as well just do it gently.

After getting out the tough and dried stains, proceed to the next step. This involves the use of a cleaning agent.

Don’t just use any detergent for cleaning, use the recommended ones. Spray the cleaning substance on the microfiber, or whatever cloth is included.

Next, gently rub the surface of your golf rangefinder, and I mean gently. Exercise extra caution when rubbing the buttons-or else you’ll destroy them.

You should switch sides of the fabric frequently so that you don’t stain the clean part. Having multiple sets of clothing won’t hurt either.

They help you avoid staining the clean parts with dust from the other sections. Do we use wet or dry cleaning clothes? Definitely wet!

Why a wet and not a dry cloth?

Use a wet and warm towel. A wet, soft towel delivers smooth and gentle cleaning.

It won’t cover the entire surface of your rangefinders. Also, the wet and warm rag stimulates the power of the cleaner.

Okay, so, it’s time for us to get down to business. Let’s start by cleaning our golf rangefinders.

Here are the steps for cleaning a golf rangefinder, briefly.

• Switch the device off
• Take out the removable parts
• Remove dirt or dust from your hands or an appropriate tool
• You could improvise DIY tools to remove the sticky dust and dirt
• Get the right cleaning agent
• Get a soft cleaning cloth (mostly included)
• Soak the cloth in warm water
• Use the cleaning agent on the damp towel
• Clean the golf rangefinder carefully and gently.
• Use an improvised tool to clean hard-to-reach parts.

How to Clean the Golf Rangefinder Lenses and Screen

Get this, use the steps above for the body. How about the lenses? Well, this is another matter.

You didn’t expect to use the same procedure to clean the lens, did you? The lens requires some extra care when cleaning.

Before doing anything else, don’t use any cleaning agent on the lenses or screen of your GPS device.

Some contact lens solutions may contain certain ingredients which could cause irritation to the eyes.

So, how do we clean these two parts?

Here are the steps for cleaning golf rangefinders’ lenses and screens.

First, clean the part using a different cloth than the one used for the rest of the body.

If you only have a single piece of clothing, then look at which part isn’t currently being worn. You may be able to use some kind of cleaner for the lenses and the display.

Use the cleaner on the cloth. Then, use gentle pressure to wipe off the screen and the lenses.

Be extremely careful when cleaning these sensitive areas. Make sure your nails don’t accidentally scratch them up.

A small scratch on the screen or lens may not be noticeable but it can significantly impact your ability to read. It can also cause errors when you’re trying to focus on something else.

They’re not too fragile, no need for alarm. You can clean them yourself if you follow the instructions below.

When cleaning, use a zigzagging motion to avoid accidentally distributing dirt to the clean areas. Cleaning shouldn’t be difficult.

Focus Problems

This is a common issue. It needs additional action. To clean the lenses within, dismantle the golf range finder. This isn’t as simple as it appears.

When dismantling something, be careful not to lose any pieces. Keep them in an enclosed space so they don’t get lost.

To disassemble the car, first, open up the hood. Then, using a rag, wipe down the inside of the hood. Finally, if there are any stubborn spots, use a toothbrush.

You could even use some household cleaners in a bucket of warm tap-and-drain cleaner, then dip the toothbrush into the mixture before using it. Use enough of the recommended amount of the cleaner to avoid an error.

Once the entire process has been completed, the next thing to do is to dry the device. Make sure everything dries out before putting together your golf rangefinder. It may take some time but it’s well worth the wait.

If you assemble your device while it’s still wet, there may be some serious consequences.

Here are the steps for cleaning the lenses and the screen.

Don’t use the same cloth for cleaning the other parts of your rangefinder as you did for cleaning the lens.

If you have one cloth, use the parts not used when cleaning the body

1. Spray some cleaning liquid on the cloth
2. Gentle rub the screen and the lenses.
3. Use a zigzag pattern when cleaning the surfaces to avoid spreading dirt
4. Avoid scratching the surface using your fingernails
5. To clean the inside of the lenses, disassemble the golf rangefinder
6. Then carefully clean the inside with a clean cloth
7. Finally, leave the gadget to dry.

Conclusion

We hope that this guide has been useful. If you have any questions, please let us know in the comments section below!