Table of Contents
People often ask, what to do when your rangefinder gets waterlogged?
Let’s find out!
What to Do When Your Rangefinder Gets Waterlogged?
While most rangefinders are designed to withstand some amount of moisture, sometimes you can accidentally expose your device to more than enough water to cause serious damage. If your rangefinder gets waterlogged follow the steps below.
- Check Your Lens
- Clean Up Any Wet Areas
- Dry Out Your Rangefinder
- Replace The Screen
- Make Sure All Parts Are Sealed Properly
- Use Protection Gear
- Don’t Leave Your Rangefinder Unattended
- Keep An Eye On Your Rangefinder
- Get Professional Help
- Be Careful With Your Rangefinder
While you should never let your rangefinder get wet, you also shouldn’t try to force it through extreme temperatures. If you find yourself in this situation, you should stop using it immediately.
Should I Use a Golf Rangefinder?
We strongly suggest using a rangefinder for every shot you take. You should be doing so before each shot.
Precision is important when playing a round of mini-golfer. A good rangefinder helps you determine where hazards are located, where the flag is, and where the green is.
If you’re looking for a range finder specifically for playing sports, then be sure to choose one that is designed for sports. There are plenty of rangefinders out there, but most are made for hunting.
Both golf and hunting rangefinders are essentially distance-measuring devices. However, there is a big distinction between them.
Laser rangefinder devices usually rely on lasers to measure distances between two objects. However, some laser rangefinder devices may be equipped with pre-loaded GPS points which allow them to determine the distance from one point to another.
A hunter’s rangefinder uses a distant target priority (DTP) setting, which means it isn’t ideal for golf. However, if it has both a DTP setting and a first target (FT) setting, then it could be used for golf.
Some rangefinders can store distances you’ve measured for clubs and suggest clubs once you have made a measurement. However, this feature may not be allowed in competition.
Before you use any tournament feature, familiarize yourself with its rules.
What To Do When Your Rangefinder Gets Waterlogged?
Are Golf Rangefinders Worth it?
Absolutely!!
Accuracy is important and you’ve worked extremely hard to get your distances right, so you want the best equipment to give you accurate results.
1. Laser Rangefinder
Lasers are used for measuring distances. They use light beams to measure distances.
The light bounces off the target and returns to the sensor. Accuracy varies depending on the amount of light returned by the target. A reflective surface will reflect more light than a non-reflective surface, which will result in greater accuracy.
For greater target acquisition and improved readability, many golf course flags are attached with reflective material at their tops.
If you’re using a laser rangefinder without a prism mounted onto the target, you might not be able to use it at some of the most popular public ranges.
However, the ambient temperature may influence the diode in the ranging system, which leads to inaccurate measurements. To ensure accurate results, wait for at least 40 minutes after powering up the device before taking any measurements.
You may find aiming the rangefinder challenging in the initial stages, but, once you have learned how to aim the rangefinder, it is not difficult at all.
You will see the total distance to the target even if it takes a while to calculate it.
2. GPS Rangefinder
Pin-seeking technology allows golf GPS rangefinder devices to lock onto a target by pointing them at the flagstick.
A GPS rangefinder requires a golf course to be loaded onto its memory card before you can use it to measure distances.
There are up to 41000 golf clubs pre-loaded into Golf Club Pro 2 and these can be upgraded regularly. These updates cater to any changes made by the user and new clubs added.
You need to be able to connect to the internet if you want to see where the pins are located. If you’re using a GPS device that doesn’t have access to the Internet, then you won’t be able to see where the pins actually are.
If the golf course has been added to the map and you’ve updated the app, the rangefinder will need four GPS satellites to locate you.
The map of the green has GPS coordinates for each hazard and pin placement. These coordinates are used by the app to calculate distances from your location to the targets.
Accuracy depends on the strength of the GPS signal and the quality of the satellite connection.
3. Optical Rangefinder
It’s not the most popular category, but it’s quite useful for measuring distance.
Laser rangefinder devices are more accurate than optical rangefinder devices.
With an optical rangefinder, you simply look through the sights and adjust the focus to get the clearest view of your targets. You must concentrate on the targets with only one eye to their distance.
Rangefinders measure distances by using the height of an object to determine its size.
Using a golf rangefinder
To use a rangefinder effectively, there are several basic things you need to know.
- Turn it on
- Find your target
- Aim the rangefinder at your target
- Activate the rangefinder
- Get your yardage
Aiming your rangefinder at the floor first and pressing the shutter release quickly to begin taking pictures will help you get a good shot.
To get accurate information, you need a stable rangefinder and effectively use them.
To keep the rangefinder steady, create a solid base by resting your arm on your chest.
Once the rangefinder has been calibrated, it should be lifted up to eye height so that you can aim directly at the object you want to measure. Then press the button.
Conclusion
We hope that this article was helpful. If you have any queries feel free to reach out in the comments section below.
