Belkin WiFi Rangefinder How to Change Router? Step-by-Step Guide with Advice, FAQs, & More

If you own a Belkin Wifi Rangefinder but don’t know how to change the router, we are here to help.

Let’s get started.

How to Reset Or Setup Belkin Range Extender

Belkin range extenders are used to extend your wireless network coverage. You can use them to connect devices such as laptops, tablets, smartphones, printers, and other Wi-Fi-enabled devices to the internet. To configure the range extender, follow these steps:

1. Turn off the power supply
2. Remove the battery
3. Unplug the power cord
4. Insert the USB cable into the back of the device
5. Connect the Ethernet cable to the router
6. Plug the power cord back in
7. Put the battery back in
8. Press the button on the front of the device
9. Wait until the LED lights turn green
10. Power on the device
11. Follow the instructions on screen to complete the setup
12. Enjoy!

Resetting the router will make it work properly again. This tool helps you reset the router to factory defaults. It also provides a fresh start. It makes troubleshooting problems easier.

Note: If you want to know a complete guide and tutorials about rangefinder click HERE.

Reset Belkin range extender

When you reset the Belkin extender, it will flash all of the lights on the extender. You must hold the reset button down for 10 to 15 seconds before releasing it.

A range extender must be rebooted before being configured. The default user name and password should be found on the back of the device.

You can use this device to extend your wireless network signal. This device works by using an external antenna to boost the signal strength. It also allows you to share an internet connection with other devices.

Setup Belkin range extender

Plug your range extender into an electrical outlet and restart your computer. Once both devices are rebooted you should see a network by the name of Belkin. setup or any other new wifi extender name. Please connect with it if it is not protected. Now open your browser and it will automatically take you to the wifi extender setup page.

This device is a wireless router. It allows you to connect your computer wirelessly to the internet.

In case this fails you can also install a range extender using the WPS method.

Note: If you want to know Binoculars vs Rangefinder Which to Buy the First click HERE.

Use Smartphone to Install Wifi Range Extender

Plug the wireless range extender into a power outlet. Browse the available networks and select Belkin setup from the available list. In any case, if the Belkin team won’t show up on the computer, please refresh the available network list again. You can also troubleshoot shoot Belkin range extender if there is an issue during installation.

You should be connected to the Internet now!

You can set up a new user name and password for your range extension as you wish.

Setup Belkin Range Extender Using WPS

You should see the green light on the Belkin Extender turn off after 5 seconds. Then you should see the green light turn back on when you push and hold the WPS Button on your home router. This means that the Belkin Extender is now connected to your home network.

The final configuration will be completed by the devices themselves.

Use Ethernet Cable to Install Belkin Extender

Most of the steps are quite similar to what we’ve already discussed in our previous posts. However, there is a slight difference in the connection type. In case you’re unable to connect to the Belkin extender or if you can’t access the configuration dashboard then plug the Belkin extender into power and plug an ethernet cable into the LAN port.

Note: If you want to gain information about Sig Rangefinder Binoculars Why Discounted clicks HERE.

How Belkin Range Extender Works ?

In simple words, a range extender is a wireless router that extends the range of another wireless router. You can configure settings such as SSIDs (network names) and passwords. A range extender can be used to extend the range of an existing network or to create a new network.

Belkin range extenders come in many different models and series. Each model has different specifications, but setting up an extender is the same with every model.

Note: If you want to know Which Courses Are on the Bushnell Neo Xs Golf Gps Rangefinder Watch click HERE.

Setup Belkin Extender With Belkinrange

Note – You can use the same while configuring with iPhone or any other smart phone. The easy way is to install the belkin range extender wirelessly using laptop so please follow the steps given below:

1. Unbox & plug the belkin range extenders to power outlet with in the range of your main router.
2. Turn the power on for your belkin extender and wait for a minute so it can load properly.
3. Go to your laptop and refresh the available network list on your laptop or you could simply restart your laptop.
4. Find an unsecured network name similar to belkin.setup (please check the configuration card came with extender).

What is Belkinsetup ?

Note – To Login Belkin wireless router goes to the computer and access the router with the Belkin router IP address. Belkin router login is different than extender logon. Once logged in to your Belkin range extender please proceed with the given on screen instructions:

The first click on get started & let the extender search the list for available wireless networks with their range.

Now you should be connected to your router.

This router should be extended to both 2.4GHz and 5GHz bands.

Now we’re going to print out our settings.

After the installation please place your extender wherever you want to place it. Then please test the connection and speed.

Restart the Belkin range extension and it works as new.

Now you can setup Belkin range extender also you can reset the Belkin range extenders at any point and start again if you feel that setup was going wrong way. There is a quicker way to conect the router with the Belkint extender using the WPA2 method.

Here is how you should do this.

First, locate the WPS (Wi-Fi Protected Setup) button on the router and extender, then power them on.

Then press the WPS button on your router and wait for the WPS light to flash on the router.

Go to the extender and press the WPS button. Let the router and extender connect to each other and sync the settings.

Conclusion

Once the extender is connected, the WPS light on it will turn solid. Now you can adjust the settings.

If you want to know more information about rangefinder click HERE.