Table of Contents
Are you wondering how to mount a night vision monocular on a fast helmet?
Let’s find out.
How Do I Mount a Night Vision Monocular on a Fast Helmet?
- Bore holes into the helmet for the strap attachments.
- If your helmet has an adjustable strap that runs from behind the neck and across the top of the skull, then you’d just need to drill two holes at the top of your helmet for the straps to go through.
- Mount the NVG (Nite Vision Goggle) by using the strap on the top of the headgear.
- Securely tie the binoculars together.
Best Night Vision Goggles [Beginner’s Guide+Real Views]
We’ll cover everything from the basics to advanced techniques for people who want to see in the dark.
Let’s begin by discussing the different kinds and generations of night-time sights, followed by essential equipment, some useful tips, and our favorite ones.
Monoculars VS Binoculars
When you think google, most of the time you’re thinking of binoculers that have two lenses.
For the first few times you use night vision goggles, stick with monoculars.
They’re cheaper than goggles ($2k) and offer better visibility for night shooting. Also, you don’t need both eyes open when using them.
Headgear
Most systems will come equipped with a headband. If you spent over $2,000, however, you’d want to make sure you looked good.
You need a helmet.
You need to make sure you get the right type of helmet. Ballistic rated ones cost more than cheap “bumpy” helmets but they’re better because they offer more protection.
Best Night Vision Goggles
For firearms, it’s mostly been “you buy what you pay for.” But it’s even more true for military-grade NVG goggles.
Buying something once and then selling it for less than you paid for it is called “buying once, crying once.”
Finally, we highly recommend buying directly from the manufacturer or a reputable retailer. Don’t risk it with a smaller reselling company.
1. ATN NVM14-3
We’ve tested this model and found it to be the best for night vision goggles.
They’re using a military-grade night vision device called the PVS14 monocular for their commercial product.
For most people, the commercial is still plenty robust, but there is one thing to keep in mind: You’re stuck with their mount. If you already have Mil-Spec or other mil-spec mount systems, you’re out of luck!
This one is a GEN3 and although most people will be happy with a GEN2, you may as well save up a bit more and buy something that makes you really happy.
2. ATN NVM14-3W
If you want the extra brightness of white phosphor, there’s a model for that too.
We haven’t tested this specific product but if it’s the same quality of the regular Gen 3 it would be good enough for us.
You should also consider increasing your initial investment by 50%.
3. ATN PVS14-3
The military version they make for the gov’t. If you need that added strength and more importantly the ability to mount mil-spec equipment.
4. Armasight PVS14 Gen 3
Another big name brand that has been gaining popularity lately. It’s a bit more expensive than the ATNs but offers similar features.
How Do I Mount a Night Vision Monocular on a Fast Helmet?
Helmet Mounted Fused Thermal & Night Vision Monocular
An integrated, lightweight, thermal/night vision monocular googles featuring 16mm intensifier tubes combined with Thermoteknikx’s silent, shutterless infrared cameras.
Fused IR camera systems can operate in either full thermal or intensified (fused) mode.
Night-time combat today requires full operational effectiveness in varied conditions and terrains, including urban environments.
Image intensifiers need some ambient light to function properly, but they’re defeated by excessive light, such as from headlights, or by dark conditions, such as when there’s no light at night or when it’s cloudy and there’s no moonlight.
Thermal imaging works independently of light and can operate even when there is no light at all. It doesn’t identify the objects seen by infrared cameras, however.
To provide maximum situational awareness in all lighting conditions, FuseIR integrates an image intensifier and thermal imaging camera into one device.
Modes
With the addition of an infrared laser pointer, supporting Infrared (I²), Thermal Only, and Fuse Night Vision Modes, along with Thermal Edge Enhancements and Full Thermal Overlay.
FuseIR weighs just 400g and maximizes detection and identification in a compact handheld/helmet mounted device.
- 384 x 288 resolution option
- AA Battery Powered
- A full 40 degree field of view
- Image Fusion
- Non-ITAR
- XTi Shutterless Technology
- Specification
- Detector 384 x 288 LWIR
- Dimensions (excluding eyecup and lens cap) 63.5 x 107 x 80mm (W x L x H)
- Dimensions (including eyecup and lens cap) 63.5 x 145 x 80mm (W x L x H)
- Weight 400g ± 2g (excluding batteries, eyecup and lens cap)
- Operating time 8 hours
- Thermal field of view (FOV) 31°
- Intensified field of view (FOV) 40°
- Detection (thermal) 340m
- Battery 2 x AA
Frequently Asked Questions (FAQs)
Are night vision monoculars good?
Night-time binoculars are a great way to view objects at night. They let you look through them and observe objects that would otherwise be invisible without them.
How much does a night vision monocular cost?
There’s no way to accurately compare prices between different models of monoculars with nightvision because they’re so wildly priced. However, if you set a reasonable budget, you can buy something within that budget.
Which is better monocular or binocular night vision?
Monoculars are best for night and thermal vision. Binoculars are better for the long term because they don’t give you eyestrain. And binoculars feel more natural than monoculars.
What night vision do Navy Seals use?
Night vision devices allow soldiers to see clearly at night. They’re especially useful for identifying targets in darkened rooms.
Conclusion
We hope this article was helpful to you. Let us know if there are any questions.
