How Do You Know if Netgear Rangefinder Working? – All You Need to Know with FAQs & More

Most of the people ask, How do you know if Netgear Rangefinder is working?

Let’s find out!

How Do You Know if Netgear Rangefinder Working?

To know if your Netgear rangefinder is working press the power button, when the rangefinder starts it will start to different icons on the screen.

Try to find the distance to some object if the range finder is working it will calculate that distance, otherwise, it will give an error.

How Do Laser Rangefinders Work?

Laser beams are sent out to bounce off from the target and return to the unit to measure distance. Rain or shine doesn’t matter because the laser beam bounces off regardless of the weather.

The size of the reticle does not affect the performance of the rangefinder because the laser beam bounces back regardless of the size of the reticle.

The reflectivity of the target does not affect the performance because the laser beam bounces of regardless of the reflectivity of the target.

The type of target does not affect the function of the rangefinder because there is no difference in the bouncing of the laser beam when hitting an object versus hitting the water.

Rangefinders provide accurate distance measurements. When the rangefinder is first programmed, you do not need your cell phone or app in the field unless updating environmental conditions.

Rangefinders continue to provide accurate distance measurements even when the battery runs out.

A rangefinder is a device used by hunters to measure distances. Rangefinders are usually attached to rifles. They are used to help hunters find targets.

In this case, the rangefinder is attached to a scope. When the rangefinder loses power, the hunter must remove the rangefinder from the scope and attach it to another gun.

Note: If you want to know a complete guide about rangefinder click HERE.

Netgear EX Setup | AC

Now it’s time to connect any device anywhere in your home with a simple-to-use Netgear EX3750 AC1200 extender.

There are 2 convenient ways for Netgear EX 3750 setup:

  • Connect with WPA2 security. WiFi Protected Access II (WPA2) lets you join a secured WiFi network without typing the wireless network name and password.
  • You can also connect with the NETGEAR setup assistant. To use the Netgear setup assistant, you need to launch a web browser from any internet connected device.

Netgear EX Setup WPS Method

For Netgear EX3700 setup, turn on your Netgear EX3700 wifi range extender.

  1. Place it near your WiFi router.
  2. Plug it into an electrical outlet.
  3. Check the power LED on the extender. Wait for it to light green.
  4. Press the WPS button on the Extender. If the link status LED lights white, the extender is connected to your router. If the LED lights are blue, the connection is good.
  5. If it lights amber or red, you need to move the extender closer.

Your extender tries to connect to the router’s 5 GHz band on the first try. If your extender didn’t connect to the router‘s 5 GHz band the 1st time, move your extender to another location. Take your WiFi enabled computer or mobile device to that location with poor WiFi router coverages.

Connect your WiFi-enabled computer to the Internet.

Note: If you want to know Leica LRF 1200 Rangefinder 2002 Model click HERE.

Netgear EX Manual Setup

The Netgear AC750 EX3705 extender is easy to set up.

  1. Just plug it into an electrical socket.
  2. connect it to your Internet connection.
  3. Then launch a web browser from a PC or mobile device and follow these instructions to complete the setup process.
  4. Follow the prompts to connect your Extender to your existing WiFi network.
  5. Move your Extender to a new location if you get no connection or a bad connection.
  6. Connect your Client Devices to the Extended WiFi Network.

Netgear EX Setup Using Nighthawk App

Not getting enough WiFi from your ISP equipment? Get a WiFi range extender and boost WiFi coverage everywhere in your house. Use the same WiFi name.

With this mesh extender, you can improve your existing WiFi network by adding more access points. You can also use Netgear Nighthawk App to set up your Netgear AC750 Wi-Fi range extender and connect your device to the internet.

The Netgear Nighthawk APP is available for both major operating systems i.e. Android & iOS.

Follow these steps below to perform Netgear AC 750 setup using the Nighthawk app:

  1. First of all, make sure you’re connected to the internet.
  2. Then, download the Nighthawk app and follow the instructions to install and configure your Netgear WiFi range Extender. Download Netgear Nighthawk APK file from Google play store or Apple Store.

Note: If you want to know How Use 19TH Century Rangefinder clicks HERE.

Netgear EX AC Extender Setup Common Issues

When you plug your computer into an Ethernet port, the computer automatically connects to the router. This means that if you want to connect to the Internet, you need to first connect to the router.

You must also make sure that the router is turned on before you turn on your computer. Once the router is turned on, you should be able to access the Internet.

How Do You Know if Netgear Rangefinder Working?

How Do You Know if Netgear Rangefinder Working?

Troubleshooting Steps to Fix Netgear AC EX Setup Issues

The Netgear AC750 EX3705 extender is receiving proper electricity from the wall outlet. You need to access high-speed Internet connection on your device.

Check all the wired connections. Don’t plug anything into them if there is damage or if they are old. Keep your extender far away from walls, room corners, microwaves, fish tanks, corded phones, metal objects, aluminum, studs, etc. Enter the correct URL in the browser window.

Power cycle your Netgear AC750 Extender once and try to set it up again. Use only the Latest Version of the web browser during MyWifiExt.Net Login.

Update the Latest Netgear Firmware Version on your extender. Reset the extender to its Factory Default Settings.

Note: If you want to gain information about How to Use West Marine Rangefinder Reticle 7×50 click HERE.

Netgear EX Firmware Update

Updating the firmware on Netgear extenders is easy. You need to download the firmware file from the Netgear website and install it on your Netgear extender.

After installing the firmware, you need to restart the extender. Once done, you should be able to see the new firmware version on the Netgear extender screen.

You need to connect your router to the extender’s wifi signal before you upgrade firmware. Open a web browser as per your choice. Enter in the address bar and press enter key. Log in to your extender using your username and password. Go into the settings menu and click the Firmware Upgrade option.


We hope that now you you know how to turn off your Netgear rangefinder. Also now you will be able to set up you Netgear router easily.

If you have any queries feel free to reach out in the comments section below.

If you want to know more information about rangefinder click HERE.


  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!