How Do You Use a Rangefinder Illuminated Scope? – Expert Advice, Tips, FAQs, & More

How do you use a rangefinder Illuminated scope?

Let’s find out!

Functioning and Use of an Illuminated Reticle Scope

Illuminated scopes are better than non-illuminated ones because they allow you to see your target more easily. You can also shoot faster when you’re using them.

Illuminated scopes can help you see your target better in low light conditions. You can use them to illuminate targets that are dark-colored or have shadows cast upon them.

Illuminated scopes can also help you see what you’re shooting at even if there’s bad weather.

Illuminated reticles are typically lit by a small led. In most cases, this led is red, but some scopes use green or Amber.

These colors are used because they can be picked up by the eye in low light conditions but don’t cause the eyes pupil to contract as much as white light, thus preserving your natural night vision.

An illuminated scope is used the same as a non-Illuminated scope. Hunters who want to hunt at night must use an illuminated scope.

Hunting during daylight hours is limited by state law. Hunters who want to shoot at dawn or dusk may use an illuminated scope.

However, the rest of the time, you should be able to see your target without any light.

Note: If you want to know a complete guide about rangefinder click HERE.

Illuminated and Non-Illuminated Reticle

Crosshairs are a feature of a riflescope. You can use them to aim at an object. They are also used by snipers. There are two wires, hairs, and threads inside a riflescope. When you take it apart, you’ll find these things.

Crosshairs are used to indicate the target. The first focal plane means the first place you see your target. The second focal plane is where you focus the crosshair on your target.

The scope has an ocular (eye) lens at the front end pointing toward the target. As the light passes through the ocular lens, it is focused on the first focal plane.

The light continues through a set of magnifying lenses to magnify the images carried by that light. These magnified images are then focused at the second focal plane and are visible through the ocular (eye) lens at the end that is aimed at your eye.

A reticle can be projected either at the first focal plane (the plane where the image appears) or at the second focal plane (where the object appears).

When using a fixed magnification scope, there is no difference in how the reticle works whether it is located at the first or second focal plane.

However, when using a variable magnification scope, there is a difference in how the reticles work depending on where it is located.

Note: If you want to know How Accurate Are Rangefinders click HERE.

The Location of the Reticle Determines Whether It Is Fixed or Magnified

When the reticle is projected onto the first focal plane, the reticle is in front of the magnifying lens. As the image is magnified by the magnifying lens, the reticle will be magnified too.

Reticles should be sized according to what you want to see. For example, if you’re shooting at a target 100 yards away, then your reticle should be 100 yards wide. But if you’re shooting at something closer than that, say 50 yards away, then your scope should be set up to show you more detail.

When you zoom in on a target, the bullets will get smaller. But the bullet drop will stay the same.

An illuminated scope doesn’t use either night vision or heat sensing technologies. It isn’t a laser scope either. So there are no regulations that govern them.

You should always be sure to read the rules about hunting in your state. Some states allow the use of illuminated scopes while others do not.

Be careful when using them because they could get you into trouble.

Note: If you want to know How Does a Rangefinder Work click HERE.

How Do You Use a Rangefinder Illuminated Scope?

How Do You Use a Rangefinder Illuminated Scope?

Use an Illuminated Reticle Scope to Improve Contrast with a Target

Illuminated scopes do not improve or alter the images of targets. Instead, they make the reticles easier to see. In low light conditions, the reticles become more visible.

When the colors or lighting of the target make the reticle hard to see, the illuminated scope helps by making the reticle brighter than the background.

Bushnell’s line of rifle scopes includes both non-illumined and illuminated reticles. You can browse them to find one that fits your low-light hunting or target shooting requirements.

Bushneils 10-mil Illuminated Match Pro 6×50 Riflescopes. First focal plane – reticle holdover is always accurate no matter what magnification you’re on.

Parallax goes down EXO to 10yards – engage even the closest This targets match director throws at you.

Bushnell prime 3-9×40 illuminated riflescopes aid in fast and accurate target acquisition. HDOs optical system, fully multi-coated optics with ultra-wideband coatings for superior optic clarity in any conditions.

Note: If you want to know How Do the Rangefinder Scale in Old Binoculars Work click HERE.

Prismatic Scope

A relatively new type of telescoping sight, called prismatic sights, replaces the image erecting relay lenses. This is a conventional telescope with a roof.

These prism designs are common in compact binoculars, spotting scopes, and other types of optics. Prism scopes allow users to easily illuminate the reticle TBR even when active illumination is switched With off.

Prism scopes can also be A used as 1x models without any focal Thermal compensation.

Low Power Variable Optic

Low power variable optic scopes are usually used for long distances. They are commonly found Leupolds on rifles, but also on handguns.

They are sometimes called “low-magnification” because they have a lower magnification than standard fixed-magnification scopes. Some of these scopes have a magnification of up to 10x.

Variable-zoom scopes are very useful for hunters when hunting. When using them, you need to know how far away your target is.

You can use this information to adjust the scope’s magnification Leica accordingly.


Telescopic sights are Rangefinders designed for specific applications. Different designs produce different optical parameters.

These parameters include magnification, objective lens Night size, and field of view. This Higher magnification leads to less susceptibility to shaking, while larger objectives gather more light.

We hope that this article was helpful. If you have any more queries feel free to reach out in the comments section below.

If you want to gain more information about rangefinder click HERE.


  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!