How to Fix Binoculars With Double Vision? – Step-by-Step Guide with FAQs, Tips, Tricks, & More

Are you having a double vision in your binoculars?

No need to worry.

We are here to help!

How to Fix DoubleVision on Binoculars

Binoculars are great tools for astronomy enthusiasts. However, they are useless if they are out of alignment. To fix this problem, you need to adjust the lenses. You should also check the mirrors and make sure they are aligned properly.

Binoculars are very useful tools that help us see things far away. We use them to watch birds or fish. We also use them to take pictures. But we need to be careful when using them because if the lenses aren’t aligned correctly, our eyes could get double vision.

You need to adjust the focus of your binoculars by turning the knobs on either side of the eyepiece. This should be done while looking through the binoculars.

Laser pointers are used to point out things. They’re also used to expose adjustments. Patience is needed when adjusting binoculars. Rubber or latex helps protect the adjustment screws.

Layers of plastic protect the screws and the inside binoculars from the elements. People shouldn’t touch the screws because they could damage them. Binoculars aren’t meant to be touched, so if someone does touch them, they might get scratched up.

Note: If you want to know more information about Binoculars we have a complete guide click HERE.

Determine Which Lens Needs Adjustment

You need to adjust the focus of your binoculars. To do this, you must first hang them up. Then get about 500-1000 feet away from the target, and then get closer if necessary. Once you’re there, you’ll see that the object looks blurry. That means the focus is off. Adjust the focus by turning the focus ring until the object appears sharp again.

Binoculars should be attached to a tripod. A tripod should be locked down so that the binoculars are level. Marble or another object can be used to make sure the binoculars are leveled.

Note: If you want more information about Which Is Better 10×50 or 12×50 Binoculars click HERE.

Important Things to Know

Binoculars are very important tools for observing nature. You need to be careful when using them. First, make sure that your binoculars are adjusted correctly. Second, if you’re going to use an adapter, make sure that it’s compatible with your binoculars. Third, be aware of the weather conditions. And lastly, check the batteries before you go out into the field.

Binoculars should be adjusted regularly to ensure proper focus. A lifetime warranty on collimator adjustments is very rare.

Binoculars should be adjusted by professionals only. You may void your warranty.

Quick Note About Adjusting Screws

Prisms are used to adjust the light coming into a camera lens. Your adjustments won’t go straight up and down, but instead will be diagonal. This makes adjustments more complicated than usual. Patience is needed when making adjustments because of this complication.

Binoculars are used to see things far away. When you adjust screws, you should make sure you don’t lose track of them. You may need new binoculars if you forget what you did.

Step-by-Step Guide

You’ll need to adjust your binoculars before you start fixing them. Take your time and be patient while doing so. Remember to keep your cool.

Note: If you want to gain information about How to Make Solar Filters for Binoculars click HERE.

how to fix binoculars with double vision

How to Fix Binoculars With Double Vision?

Materials and Tools

You should always check if you have the right equipment before starting a new project. You may need some tools to get started. A small screwdriver set is extremely useful.

Tripods are used by photographers to hold cameras steady while taking pictures. A tripod may be needed if you want to take photos or videos using a camera.

Locate the Adjusting Screws

Screws are hidden behind adhesive strips or plastic casings. Adjusting screws are located in the user’s manual, but manuals aren’t always available.

Horizontal screws are located near the eyepiece. You may need to remove an adhesive strip before using a razor blade.

Binoculars adjust vertically by sliding along the barrel. Plastic screws hold casings on or thin adhesive strips sit slightly above the rest of the binoculars.

Note: If you want to know When were Binoculars Invented click HERE.

Find a Target

A guide should be able to help you locate a lake or building by using a star. You can also use a compass if you want to.

Choose the brightest star you can find. Avoid the moon and star clusters. Adjust the star until it’s perfectly centered over the middle of the screen.

Binoculars should be set up on a tripod. When using them, you need to make sure that the target is lined up as closely as possible.

Defocus a Lens

This might sound like it doesn’t make much sense but trust me – it’s going to make everything a LOT easier when it comes to adjusting.

Adjust the Horizontal Screws

Always start with the horizontal screws first. Make adjustments 1/16th of a turn at a time. Bring it halfway to the correct position with 1 screw before bringing it the whole way together by adjusting the second screw.

A screwdriver is used to tighten or loosen nuts and bolts. When tightening a nut or bolt, the head of the screwdriver must touch the top surface of the nut or bolt. This is called the shoulder of the tool. The other end of the screwdriver should never touch the nut or bolt when tightening.

The screwdriver should always be held perpendicular to the nut or bolt.

Adjust the Vertical Screws

When adjusting the vertical screws, do everything the same way as the horizontal screws. Take 1/8th of an inch at a time and make sure to take breaks after every adjustment, just like you did when you were putting the horizontal screws together.

Other Helpful Tips

Binoculars should be adjusted by taking your time and doing it right. You shouldn’t expect to get them perfectly aligned in a few moments. It’s going to take hours or days to get the job done, and it’s going to be frustrating. Don’t rush into it.

Binoculars are very important tools that help people see things far away. They are also used to watching movies and television shows. People who use binoculars usually do not want to lose them because they are expensive. A person should be careful when using binoculars because they could break easily.

Binoculars should be treated carefully because they are very valuable. Don’t take chances when adjusting them. If they’re expensive, don’t break them by trying to adjust them.

Older binoculars may require some minor adjustments. You can do this by yourself.


Binoculars are great tools for looking at far-away objects.

You can use them to see distant planets, galaxies, and star clusters. But if you want to see close up, you’ll need to adjust your binoculars.

This can be done by bringing them into focus. A good way to do this is to look at something nearby, such as a tree or a house. When you focus on an object near you, the image of the object gets bigger.

Once you’ve focused on an object, you can move closer to it without losing focus.

If you want to know more information about Binoculars click HERE.


  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!