How to Reset a Leupold Rangefinder? – Step-by-Step Guide with FAQs, Tips, & More

People often ask how to reset the Leupold rangefinder
Let’s find out!

How to Reset a Leupold Rangefinder?

The reset button is located at the top right corner of the rangefinder. Press it firmly and hold it down for several seconds. If this doesn’t work, try pressing the button again.

Note: If you want to know a complete guide about rangefinder click HERE.

Leupold RX Full Draw

Leupold RX Full Draw 4 Digital Archery Range Finder was designed by Leupold engineers and designers to be better than any other comparable model.

Leupolds are great rangefinders that use high-quality optics. They are designed to be comfortable to hold and easy to operate. Leupolds are waterproof and feature a durable body.

Laser rangefinders emit a beam of light that travels down the barrel of the gun. This beam bounces off objects and measures how far away those objects are. When you aim your gun at something, this beam hits that object and bounces back toward the rangefinder. The rangefinder then tells you how far away that object is.

Distance Rxfulldraw Can Measure

A top-quality 6x23mm monocle that includes a laser rangefinder. It measures distances up to 900 yards, 1100 yards, and 1200 yards. It also measures targets from 6 yards to 900yards, 11 yards to 1100 yards, and 12 yards to 1200 yards.

Note: If you want to know How to Use SLR Magic Rangefinder click HERE.

Safety Precautions

This manual is written by Leupold, but it’s not very clear about what kind of safety measures are needed when using this type of weapon.

  • There are some things that need to be remembered when using this weapon, such as pointing the laser away from people.
  • This product is designed to be used with a 3V lithium-ion battery (CR2). You should not use any other type of battery or power source.
  • Laser rangefinders should always be used according to instructions. Using the wrong settings could cause injury.

Battery Power Status Indicator

When the battery is low, the screen will turn off. You need to recharge the battery before using it again.


  • Targets that are bright and shiny are easier to see.
  • Black roofs are harder to see because they absorb light.
  • Smaller objects are easier to see than large ones.
  • Rain reduces visibility.
  • Fog makes things hard to see.
  • Sunlight causes problems.

Note: If you want to know How to Use the Russian Rangefinder click HERE.

Quick Set Menu

When you push the POWER button, the device will be ready for ranging.

To go into the quick set menu, you have to press and hold the MUTE button for at least 1 sec. Then you could select what I wanted to do by pressing and releasing the MUTE button. After that, press the POWER button to make a selection.

Finally, let the rangefinder sit idle for 30 seconds. This causes the rangefinder to turn off automatically.

Instruction Manual

The display shows all possible characters available.

NOTE: Activating certain features automatically disables other features. For example, activating the yardage mode will automatically disable the meter mode.

Factory Settings

To reset your Leupold RX-FULL DRAW 4 to factory settings, press power to activate the rangefinder and press and hold Mode, then press and hold Power. A 10-second countdown timer will appear; Factory Reset will occur after 0 has appeared.

Calibration Steps

When you enter the quick set menu, press and hold MODE until CALC appears on the screen. Then press and release POWER to select LOS, BALL or TRIG.


Calibrate your RX-FullDraw4 by pressing and releasing power, selecting LOS or TRIG mode, and then pressing MODE. Then, go through the menu options until you reach the final option: Display brightness.

Display Intensity

This mode is used to adjust the brightness of the display. You can use this feature to match the intensity to your current conditions.

Your RX Full Draw 4 has three display intensity modes

  • low
  • medium
  • high

To navigate through the Quick Set menu press and hold the MODE button until DISP appears in the upper display. Then press and release the power button to toggle between high/medium/low. To save the setting press MODE.

Leupolds are great riflescopes that are used by many hunters. They are very accurate and easy to use. You can adjust the focus by turning the eyepiece left and right.

Note: if you want to know How to Use Shepherd Scope Rangefinder With Different Bullets click HERE.

Unit Output

This mode is used to choose whether you want to use yards or meters as your preferred unit of measurement. You can press and hold the power button to switch between them.

Selectable Reticles

There are three preloaded reticles for the RX-Full draw 4. You can use any of them as your primary aiming point by pressing MODE repeatedly until the desired reticle is flashing. Then press POWER repeatedly to cycle through the available reticles. When the desired reticle is selected, press MODE again to lock in the selection.

A familiar reticle to rifle scopes. Reticles draw eyes to the center, easy-to-see, and do not cover the target in the center where aiming is most important.

how to reset a leupold rangefinder

How to Reset a Leupold Rangefinder?


You can find the reset button in the top right corner. This article also tells you about other modes of Leupold Rangefinders.

If you have any questions let us know down below.

If you want to know more information about rangefinder click HERE.


  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!