Table of Contents
People often ask, how to set up Leica Rangefinder Binoculars.
Let’s find out!
How to Set Leica Rangefinder Binoculars?
Leica Geovid HD B Binoculars are high-quality binoculars that are very precise.
They are made by Leica company. This device measures distances using an invisible infrared pulse and detects the temperature and humidity around them. With these measurements, they can adjust the focus and the zoom automatically.
Note: If you want to know a complete guide and tutorial about rangefinder click HERE.
Applications
Leicas are sturdy cameras that are perfect for outdoor use. They’re also waterproof to a depth of five meters, and the internal optics won’t get fogged by water.
Attaching the Lens Covers
You need to thread the strap through the hole on the eyepiece first. Then you should attach the strap to the right hand side of the binocular.
Inserting and Changing the Battery
The Leica Geovid HD B draws its power supply from an internal 3V Lithium button cell. To charge the battery, you need to open the battery compartment cover, insert the battery into the slot, close the cover and turn the camera on.
What are some things to be considered about batteries?
The battery should be replaced when needed.
Batteries should never go into a fire. They should never be charged, heated, recharged or broken apart. Used batteries should be returned to the store or disposed of as special trash.
Battery Charge Level
Batteries last for more than 2,000 measurements depending on the conditions of use. Battery life can be shortened by low temperatures and frequent use of the scan mode. A used battery is shown with a flashing measurement value and reticule. When flashing starts, about another 50 measurements are possible but with a continuously reduced measurement range.
Leica recommends the use of branded battery packs. Leica Geovid uses branded batteries.
Note: If you want to know Neo Golf Rangefinder and How to Add Courses click HERE.
Adjusting the Eye Spacing
Binoculars adjust the distance between the two lenses. The right lens should be slightly closer than the left lens. This allows you to see more objects in your view.
Setting the Unit of Measure
This camera can measure distances using both imperial units and metric units.
This setting also determines the units you use for the point of aim. The factory setting on this camera is meters. You must set the unit to yards before you can shoot using this camera.
Metric units are used by default. When metric units are selected, a dot is shown to the bottom right of your reticule.
This is a test of the ballistics curve function. Pressing the secondary button saves the current setting. Then the display lights up as confirmation. Pressing the secondary again changes the display to the next option. Pressing the secondary once more ends the program.
Focusing Diopter Compensation
On the Leica Geovid binoculars, the central focusing dial is used to focus on objects far away. The two diopter compensation knobs are used to correct vision problems when viewing without glasses or to focus the reticules.
With the right eye, adjust the red index until the reticule is in focus. Then move the central focusing dial to make sure the image is in focus.
You must use the + or – value on the diopter scale to adjust the focus.
Note: If you want to know Leica M3 Rangefinder How to Use click HERE.
Range Measurement
Leica Geovid HD-b. To measure the range, you must aim directly toward the object. You press the main/release button, and the range finder is activated for 6 seconds. If you hold the button, the reticle stays lit for another 6 seconds.
The reticule disappears momentarily when you press the main / release button. You can measure the distance to an object by holding down the main / release button until the reticule appears. When you let go of the button, the reticule disappears, and the measured value is displayed.
When you are close enough to see something, you need to be able to tell how far away it is. You also need to know whether or not it is reflective.
Note: If you want to gain information about Lofthouse Pro Nav Gps Rangefinder How to Charge click HERE.
Measuring Range and Accuracy
The Leica Geovid HD B Binoculars’ range is up to 2000 yards (1825 meters). The maximum range is achieved when using highly reflective targets and steady hands. The accuracy of the Leica Geovid Hd B Binoculars is +/- 1825 feet (541 meters).
Scan mode is useful for measuring small and moving objects.
Setting the Zeroing Distance
Start with step 1 if you haven’t yet opened the menu system, or step 3 if you’ve already set the ballistics curves and SLD is still flashing in the screen. 1. Press and Hold the secondary/menu button • US.EU displays. 2. Briefly press the secondary/menu button. • The display changes to BAll and then to SID.
Maintenance Cleaning
Your Leica Geovid HD B binoculars need no special care. Dirt particles should be removed with a hairbrush or blow dryer. Fingerprints should be wiped off with a damp cloth.
Highly soiled lens surfaces can be cleaned with a moist cloth and then wiped off using a soft, clean leather. Don’t apply too much pressure while cleaning.
Basic Information About the Menu System
Main menu includes 4 options: display in yards/meters, ballistics curve, zeroing distance, and ballistic output format. These options can be accessed by repeatedly clicking the relevant buttons.
Scan Mode
The Leica Geovid is an excellent choice for measuring distances. It can be used as a rangefinder or a scanner. You can hold down the main button (7) for about 2.5 seconds to enter into scan mode. Then you’ll see a new measurement every second.
Equivalent Horizontal Range
Shots at higher or lower targets must be made using the equivalent horizontal range. This means that the bullet trajectory is adjusted according to the new conditions. For example, if the bullet hits the target at an angle, this will cause a different impact point. Therefore, the bullet needs to be fired at the equivalent horizontal range.
Point of Aim
A Leica Geovid HD B is an excellent camera for hunting because it shows you where your shot is going. It compensates for the flight of bullets by showing you where the bullet is headed. This allows you to make sure that you’re hitting what you want to hit.
Using Alternative Ballistics Curves
You can create your own custom ballistics curve if you want. Your own custom ballistics curve is stored on the SD card.
Camera AG recommends using SanDisk SDHC UHS-I Class 10 memory card.
How to Set Leica Rangefinder Binoculars?
Conclusion
Cleaning should only be done using a moist leather cloth. Dry cloths risk static charge, alcohol and other chemical solutions shouldn’t be used to clean the optics, and personal serial numbers should be noted in the documentation for security purposes.
If you want to know more information about rangefinder click HERE.
