Table of Contents
People often ask, what are the crosshairs of a rangefinder riflescope calibrated for?
Let’s find out!
What Are Crosshairs of a Rangefinder Riflescope Calibrated For?
The crosshairs of a rifle scope are calibrated to give you a precise measurement of the distance between objects. They are used to measure distances from a target at which a bullet will hit it. This allows you to calculate the exact point where the bullet hits the target.
Ranging Reticles – What You Need to Know For Competitive Shooting
Reticles are very important when we shoot guns. There are different types of reticles, such as iron sights, red dots, and holographic sights. Different types of reticles help us aim better. For example, if we use an iron sight, we need to adjust the elevation and windage knobs on the gun to make sure that the bullet hits the target. However, if we use a red dot or holographic sight, we do not need to adjust these knobs because the reticle is already set up correctly.
What Are Reticles?
A reticle is an aiming device used by snipers to help them aim at targets. The reticle is usually made out of metal or etched onto the glass.
How Do Reticles Work?
Reticles are designed to help you get a better shot. There are many types of reticles available, but some are designed for specific uses such as low-light shooting or general hunting. Some are designed to be simple, while others are more complex. More information about the reticle will allow you to adjust the holdover position.
Note: If you want to know a complete guide about rangefinder click HERE.
What Are the Different Types of Reticles?
There are many different kinds of reticle patterns available. We’re going to focus on those used by shooters who compete in matches.
The Original Reticle
A typical rifle scope reticle consists of two parallel lines that intersect at right angles. This type of reticle is commonly used by hunters and marksmen. It is also used in military sniper rifles.
The Bullet Drop Compensation Reticle
BDC reticle is used for shooting competitions. Reticles can be used to determine bullet drop and windage. Practice helps shooters learn how to use them effectively.
The Milliradian Dot Reticle
Mil-Dot reticles were originally designed for military use but later became popular among recreational shooters. They give shooters information about wind speed and target distance. This makes them useful for sniping. Old-school shooters may pull these out for nostalgia purposes.
The MIL Reticle
MOA reticles are slightly different than MIL reticles. Both MOA reticles and MIL reticles can get to the same angles, but MOA reticles use more lines and MIL reticles use fewer lines.
Mil reticle is a great choice for precision rifle shooting competitions. You can easily fine-tune your aim by adjusting the magnification.
Note: If you want to know Leica LRF 1200 Rangefinder 2002 Model click HERE.
The Minute of Angle Reticle
MOA reticles are designed for long-distance shooting. They are used for benchrest and F-class competitions. Adjustments are made in 1 inch per 100 yards. This reticle is relatively easy to use, but some people prefer other types of reticles.
The Illuminated Reticle
Illuminated reticles are useful when shooting at night. They are not recommended as primary sights. Fatter illuminated reticles are more difficult to use than standard ones.
Note: If you want to gain information about How to Use West Marine Rangefinder Reticle 7×50 click HERE.
Why Are MOA and MIL Angular Measurements Important?
MOA stands for Minute Of Angle, but it can be confused at first because there’s some thinking power needed to understand it. A single minute is the shooter-talk for one-sixtieth of a degree. Imagine a typical 360-degree circle. Those degrees are based on how far away the target is. 1/60th or 1/180th of a degree, depending on the distance, makes a significant difference.
The MOA (minute of angle) is an important concept in shooting. It explains why you need to adjust your sight picture to compensate for different ranges. In this case, the MOA is used to explain how the bullet travels through space.
You can get the same shot using slightly different settings. MIL is less precise than the MOA, which is the reason why MIL rules the rooster in PRS or NRL matches. MOA, on other hand, is more popular in Benchrest or F Class shooting.
How Should I Choose the Right Reticle for My Scope?
We’re interested in F-Class midrange shooting, so we’re likely to reach for an Elite Tactical SMRS Rifle Scope 1-8.5 x 24. This scope features a durable EXO barrier coating, and it can handle the punishment of any F-Class rifle.
This rifle scope is great for hunting or competition. It transitions quickly and smoothly. Everything is coated with the EXO barrier.
Note: If you want to know How Use 19TH Century Rangefinder clicks HERE.
What Are the Crosshairs of a Rangefinder Rifle Scope Calibrated For?
Conclusion
Reticles are usually chosen based on what type of shooting you’re doing. For benchrest shooters, a front focal plane (FFP) is typically used while for target shooting, a rear focal plane (RFP) is preferred.
We hope that this article was helpful. If you have any queries feel free to reach out in the comments section below.
If you want to know more information about rangefinder click HERE.
