Table of Contents
Do you want to know where the serial number on Tour V3 Laser Rangefinder is?
Read this article to find out.
Where is the Serial Number on Tour V3 Laser Rangefinder?
Tour V3 Laser Rangefinder has a serial number on the outer package and on the product.
How to Reset Jolt or Yards on Tour V3 or Tour V3 Slope?
Step 1: Turn off your device. You can do this by leaving it idle for at least 30 minutes.
Step 2: Press the power/fire key on the unit for 10 seconds.
Step 3: Hold down the power/fire key for 10 seconds to turn off the device. Then hold down the power/fire again to select one of the four available modes.
- Jolt/Yard – displayed as JLT
- Y-Yards – Displayed as Y
- JOLT/Meters – displayed as JLT M
- Meters – displayed in metric units (M)
Step 4: When the eyepiece display shows the mode you want to use, press the FIRE button to select it.
Step 5: If you didn’t choose the right mode, wait for the device to turn off and then repeat step two.
How to Register My Bushnell Legacy GPS Rangefinder?
To get started, go to www.bushnell.igolf.
Registration is free and takes just a few minutes. You can use the supplied cable to connect to the internet.
Step 1: Plug the GPS receiver into the provided power adapter and connect the other side to a USB connection on your PC.
You may see an indication that says “USB mode” on the screen of your GPS unit. Your PC will then identify the GPS receiver as a standard USB mass-storage device.
Step 2: Visit http://www.bushnel.igolf.com, click ‘Register Now, enter the required information, and then click ‘Continue’.
Step 3: Install the device driver and web plug-in that allows your device to communicate with the app.
Step 4: The final setup screen allows you to update all the preloaded courses on the app. Press the sync devices icon, and then let the process run its course.
Where Is Serial Number On Tour V3 Laser Rangefinder?
Frequently Asked Questions (FAQs)
What are the golf course abbreviations for hazards?
- LFB – Left Fairway Bunker
- MFB – Middle Fairway Bunker
- RFB – Right Fairway Bunker
- LFW – Left Fairway Water Layup
- LFWC – Left Fairway Water Carry
- MFW – Middle Fairway Water Layup
- MFWC – Middle Fairway Water Carry
- RFW – Right Fairway Water Layup
- RFWC – Right Fairway Water Carry
- FGB – Front Green Bunker
- RGB – Right Green Bunker
- LGB – Left Green Bunker
- BGB – Back Green Bunker
- RGW – Right Green Water
- FGWC – Front Green Water Carry
- FGW – Front Green Water Layup
- LGW – Left Green Water
- BGW – Back Green Water
- CRK – Creek Layup
- CRKC – Creek Carry
- EOF – End of Fairway
My Neo Ghost shuts down every 15 minutes, how can I turn off its automatic shutdown feature?
Step 1: To disable auto-off, navigate to the settings screen by tapping the “Menu” button.
Step 2: Click on the Settings icon to open the settings menu.
Step 3: Click the “Select” button to confirm.
Step 4: To turn off Auto Off, use the up or down buttons to select “Auto Off” from the Settings menu.
Step 5: Click the “Select” button to confirm.
Step 6: Click the up or down arrow to highlight and then click “OFF”.
Step 7: Click the “Select” button to confirm the settings.
When I play golf, my unit doesn’t automatically advance from one hole to the next?
If you’re having trouble finding the right hole, you may need to download the latest version of the golf course. You can use the up/down arrows to move through the holes.
Can the battery in the GPS watch be replaced?
Most of the time, the batteries we use in our GPS watches will last for years without needing to be replaced.
The warranty on the watch will be voided if the user attempts to replace the batteries. If you think your batteries are dying, please contact Bushnell customer service.
Are there any international courses available for download?
If you don’t already have an international golfing destination loaded into your GPS device, you can get one by visiting bushnell.iGolfer.com.
How do I know whether my course is available for the new XGC+? (Legacy)
After finding a golf club at Bushnell.iGolf, there will be descriptions of the different courses available for purchase.
Front/Center/Back
If this state has an available measurement, it will have the dimensions for the front/center back of the green. This info is pre-loaded.
Custom Points
If this state has an available hazard rating, it will have the hazard ratings for the hazards on the course. These ratings are pre-loaded.
Course Image
If this option is selected, then the golf course images for each individual green will be displayed. However, these images are not loaded by default.
How can I modify my GPS points during a game of golf?
With the Neo+ and Hybrid, you can easily change the golf course files to suit your preferences.
Step 1: Pressing the ESC key during play golf mode will bring up the menu.
Step 2: To change the golf hole, select ‘Map Golf Hole’ from the menu, then click where you want to change the golf hole.
Step 3: Press the OK key.
Step 4: When the point has been saved, click the Save button and then OK.
If you want to add additional points, repeat the exercise above.
My GPS handheld/ watch is showing 999, what does that indicate?
There are several reasons why the GPS may show 999.
- If the unit doesn’t have satellite coverage, it will show “999” instead.
- The GPS rangefinder calculates distances based on your current location.
- If you’re at least 1,000 feet away from the golf course you’ve selected, the device will show ‘999’.
How many golf courses can I add to my Bushnell Golf GPS (legacy)?
Bushnell Neo – Can hold up to ten golf courses at once
Bushnell YardagePro – Holds up to 10 courses at once
Bushnell XG Golf Courses – Will hold 20 golf courses at once
Bushnell XGC Golf Courses – Holds up to 100 golf courses at once
Conclusion
It’s a compact, lightweight, affordable binoculars with good optical quality.
The Bushnell Tour v3 has the same feature set as the Bushnell Tour v2 but it has been updated with new coatings on its lenses and improvements to its optics to provide better image clarity.
Please feel free to leave any additional questions/comments here.
