Where To Find Leupold Serial Number Rangefinder? – Overview, Tips, and More

Do you want to know where to find Leupold Rangefinder serial number?

Let’s look into it.

Where to Find Leupold Serial Number Rangefinder?

You can find the Leupold rangefinder serial number engraved on the bottom of the turret.


Leupolds are designed for extreme environments, so they’re perfect for any situation.

If at any point your Leupold rifle scopes, mounts, red dots, binoculars, or spotting scopes don’t function properly, they will fix them or replace them for free even if you aren’t their original owner.

Tests Leupold Go Through

Impact Tested + Verified

Each scope design must withstand 5,000 impacts from the Punisher, which simulates the recoil of a.308 caliber weapon. The forces of each hit are three times greater than the recoil of a typical.308 caliber weapon.

If the scope doesn’t perform at all during the testing, we make changes to the design and retest it.

Waterproof + Fogproof

With our patented technology, we’ve designed optics that are waterproof and fog-proof for use in any environment.

Extreme Climate Exposure

We ensure that our optics will function well even when exposed to extreme temperatures ranging from -40 degrees Fahrenheit to 160 degrees Fahrenheit.

Electronics Limited Two-Year Guarantee

Leupold offers warranties on their products, including rangefinders, thermal scopes, and other electronic devices. These warranties cover defects in material and workman­ship for two years from the original sale.

If the product proves to be defective, Leopold & Stevens will fix or exchange it for free during the two-year warranty period. You must provide proof of purchase to verify the warranty.

where to find leupold serial number rangefinder

Where To Find Leupold Serial Number Rangefinder?

Frequently Asked Questions (FAQs) – Leupold

Do Leupold binoculars have BAK4 prisms?

We use BAK4 prism lenses in all of our Leupold Binoculars except for the BX5 Santiam 15x 56mm which uses Abbe Koenig prism lenses.

What does Synergy Built mean?

The Synergy Built initiative represents a combined design effort from a dedicated team at our Leupold offices in Beaverton, Oregon

This group of professionals has worked extensively to create an entirely new version of our Observation product.

  • Optical Engineering
  • Design Engineering
  • Mechanical Engineering
  • Manufacturing Engineering
  • Quality Assurance Testing

The results are a set of binoculars and a set of spotter scopes that are unlike anything else in the industry.

Which models are better than the others?

We’ve designed our binoculars and spotting scopes to be similar to our rifle scopes in terms of their various levels of glass qualities, internal lenses, and external lenses.

  • Entry-level binoculars are usually labeled as BX-series models and entry-level spotter scopes are usually labeled as SX-series models.
  • mid-level products include the BX-2 and the SX-2.
  • High-end products are labeled as Bx-4, with Bx-3 products between mid-range and high-end.

Which is the best Leupold binocular for children?

The Yosemite is the ideal choice for viewing astronomical objects because of its low magnifications, wide fields of view, small sizes, and large interpupillary distances.

What are the advantages of roof prism and Porro prism binoculars?

Roof prisms are lighter than roof prisms and have a shorter focal length. They also have a more streamlined shape.

Roof prism binocular lenses usually cost more than Porro prism binocular lenses but they offer better depth perception.

Are scratched or broken lenses covered under warranty?

If your glasses get scratched or damaged by the customer, they’re not covered under the Performance eyewear guarantee. You may replace them at no charge if they’re damaged.

Can I purchase the frame or lenses separately?

Performance eyewear is only available in one package. You cannot order frames and lenses separately at this time.

Can I purchase my RX prescription directly from Leupold?

Currently, prescription lenses cannot be ordered directly from Leupold but they can be ordered through an authorized dealer.

All Katmai and Becnara models are compatible with prescriptions and can be fit with prescriptions from third-party eyewear retailers only.

Can I have a Bullet Drop Compensation (BDC) dial made for my scope?

Yes, BDC (Bidirectional Control Device) is available for most Leupold scopes, but if you want to get a Custom Dail System (CDS), you can use one free custom load and purchase additional loads for different loads and/or environmental conditions.

Can I have an existing scope refinished?

Unfortunately, Leupolds cannot repair the scope. If you need to fix any scratches, dings, rings, etc., you’ll need to get a new one. However, if you want to keep the original Leupold scope, we can send you a replacement part for free.

Where does Leupold get its glass?

There aren’t any American manufacturers that can provide us with enough high-grade lenses at this point in order for us to produce our own line of optics.

We design our lenses at Leupold, which are made by American optical engineers in state-of-the-art facilities. They’re then purchased from suppliers who must meet strict quality requirements.

We inspect incoming components for quality assurance purposes before they’re used in production. Most of the optical glass we use comes from domestic suppliers, but some come from Europe and Asia.

It doesn’t really matter where the glasses come from; what matters most is how they’re made. We use proprietary lens coatings, engineer the prescription of the glasses and the way they fit into the frame, and construct them using high-quality materials.

What is the difference between a first focal plane reticle and a second focal plane reticle?

A second focal plane reticle (SFP) allows for an increase in eye relief without changing the apparent size of the crosshairs. As the eyepiece is zoomed out, the reticle appears smaller but covers a larger portion of the scope’s field of view.

Can I apply an oven-baked Cerakote finish to my Leupold Riflescope?

Yes. Our lenses are made from polycarbonate plastic which thrives in temperatures up to 160 degrees Fahrenheit (71 degrees Celsius). However, we recommend storing them in a cool environment away from any chemical fumes.


Leupold rangefinders are well-known in the art. The Leupold VX-4 and VX-3 series of rifles scopes have been very popular among hunters for many years, and they’re still being made today.



  • Sarah Wilson

    Sarah is a content consultant at The Outdoor Stores where she is ready to guide you through the features of a good firearm for your outdoor activities and hunting hobbies. Her expert knowledge and intellectual skills have helped The Outdoor Stores greatly.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!