Table of Contents
People often ask, who makes the h400 golf rangefinder?
Let’s find out!
Who Makes the H400 Golf Rangefinder?
Golf H2 makes H400 golf rangefinder. The new Golf H2 is a compact, easy-to-use, and very accurate range finder that can be used for both indoor and outdoor applications.
The H2 has an internal battery that allows it to operate continuously for up to 3 hours on one charge. It also features a large LCD screen with a backlit display so you can see the distance to your target in low light conditions.
Sony DSC-H400 W – Features
The Sony DSC H400 is a digital camera made by Sony. It was launched on September 12, 2005, and released in Japan on October 15, 2005. The H 400 is the successor to the previous H 300, which was launched in 2004. Like its predecessors, it has an APSC size sensor with a 24-megapixel resolution.
LCD Screen
The Sony Cyber-Shot DSC-H400 camera has a 3.0-inch clear photo LCD screen with 460,000 dots. The LCD brightness control can be adjusted from 1 (dark) to 5 (bright). You can also change the screen size from high to standard to conserve battery life.
Recording Media
The camera is compatible with the following recording media: MicroSD card, CompactFlash card, Secure Digital card, Secure Digital High Capacity card, and Secure Digital Extended Capacity card. It also has an internal storage capacity of approximately 55 MB.
Image Recording Formats
The camera captures still images in JPEG format. Moving images can be captured in MP4 format (AVC / H.264) with AAC stereo audio.
Image Sensor
For optimal picture quality, the camera uses an APS-C size 1/2.3 inch CMOS sensor with approximately 20.4 million total pixels and 20.1 million effective pixels.
Optical Zoom Lens
The camera has an optical viewfinder, which allows for accurate framing. It has a maximum focal length of 1550 millimeters (63 inches) when shooting 4:3 images and 1700 millimeters (66 inches) when shooting 16:9 images. Its widest aperture setting is f/3.4 and its telephoto end is f/8.0.
Digital Zoom
With the 63x optical zoom, you can reach higher magnification levels by using the PrecisionDigitalZooming or the Smart Digital Zooming. Precision Zooming enlarges all image sizes by the total zooming factor of approximately 126x, which includes optical zooming of 63x.
The Smart Zooming enlarges the images digitally within the range where the images won’t be deformed, according to the image width and height. The amount of zooming for each width and height is as follows:
Who Makes The H400 Golf Rangefinder?
Optical SteadyShot with Active Mode
With Optical SteadyShot, camera shake compensation has been improved by adding new electronic stabilizing technology. This means that you can now get sharper photos even when shooting at long focal lengths.
Still Image Sizes
With the DSC-H100, you can select from the available sizes and aspect ratios for recorded digital still images.
- 20M: 5152 x 3864
- 10M: 3648 x 2736
- 5M: 2592 x 1944
- VGA: 640 x 480
- 16:9 15M: 5152 x 2896
- 16:9 2M: 1920 x 1080
Sweep Panorama
You can take multiple pictures by moving the camcorder in an arc, either horizontally or vertically. You can choose which direction to pan the camcorder while taking the pictures.
Additional features
Recording Movies
You can also record videos in MPEG-4 format (30p), which has an AAC soundtrack.
There are three different types of driving modes available for the H400: Single shot, continuous autofocus (AF), and continuous AF+MF.
Continuous shooting: The camera records continuous images while you press and keep holding down the button. You can record up to 100 continuous images in one burst at approximately 0.7 fps.
Set the Self-Timer Mode to a 10-sec. (10 seconds) delayed so you can be in the picture. The Self Timer with a 2-sec. (2 seconds) delayed can help prevent blurry pictures from camera shakes.
Self-portrait timer mode will capture an image 2 secs after the face of one or two people is detected.
Self-Timer Continuous mode takes up to 10 continuous shots after a 10-second delay, which allows for long exposures.
Exposure bracketing allows you to take a series of images with different exposures. You can choose from three different steps: 0.3EV, 0.7EV, or 1.0EV.
White Balance (WB): The bracket WB mode takes three shots, one with the current white balance setting, one with the white balance set to blue, and one with the white balance set to orange.
There are three different auto-focus areas available for you to choose from: Face Detection, Eye Tracking, and Smile Detection.
With multi AF, the autofocus system works in all ranges of the finder’s focal length. When you half-press the shutter, an indicator appears around the area that is focused.
Center AF: When you press the shutter button halfway, the autofocus locks onto your subject and keeps it there until you take the picture. You then use the control dial to move the subject back into the frame.
Focus AF: The camera focuses in a very small part of the image.
When using the autofocus mode, you can use the “Trace AF” feature to keep the subject in sharpness as it moves around the frame.If both “Trace AF” and “Track AF” are enabled, the system will automatically follow the subject when it moves around the frame (if it is detected).
AF Illuminator – The AF Illuminator illuminates your subject for easier focusing in low light conditions. You can turn the AF Illuminator On or Off.
Face detection: Face detection technologies detect up to eight individual faces and control the camera settings for each face individually. They can also prioritize certain individuals’ faces by giving them special attention. You can even choose which person’s face gets special treatment.
Intelligent Auto scene recognition allows the D7200 to detect nine different kinds of scenes and select the appropriate shooting modes for each scene. It may also be able to determine if the device is mounted on a tripod or moving.
On the camera body, there are three different ways to select a mode: using the Mode dial, pressing the button labeled “Mode,” or selecting one of the options displayed when
Intelligent Auto mode allows you to take pictures without having to adjust any settings manually.
The program auto allows you to take pictures automatically by adjusting both the shutter speed and aperture value. You can select various shooting modes from the menu.
When shooting stills, you can adjust the aperture setting manually. However, the camera will automatically set the shutter speed for you.
Shutter priority mode lets you adjust the shutter speed manually. The camera will then automatically select an appropriate aperture value.
Manual mode allows you to adjust the settings yourself. The shutter speed can range from 1/2000th to 30 seconds. The f-stop (apertures) can range from 3.4 to 8.1 (wide angle) or 6.5 to 8.0 (telephoto).
Conclusion
We hope that this guide has been useful. If you have any questions please let us know in the comment section below.
