Table of Contents
How do you see results on the rangefinder…
Let’s find out!
How Do You See the Results on a Rangefinder?
Rangefinders are used to measure distance. There are various types of rangefinders with different features.
To see the results on a rangefinder first you must aim at the target and press the relevant range button according to the model of your rangefinder.
When the rangefinder measures the distance you can see the results through its eyepiece or you can see them on the app that your rangefinder supports.
This app is paired with the rangefinder which shows many other functions too on your smartphone.
Note: If you want to know a complete guide and tutorials about rangefinder click HERE.
How Ranging Performance Was Tested
The first test was done under ideal conditions (low light, sunset conditions with good visibility), the second test was done under bright conditions (sunny, midday conditions with good visibility), and the third test was done offhand (standing, unsupported position with good visibility).
The results were as follows:
- Rangefinder 1 – 600 yards 4.5 feet
- All models were accurate within 5 yards.
- Accuracy decreased as target size increased.
- The three rifles were within an inch or two of each other. The Zeiss VictoryRF 10×45 was the most accurate rifle in this test.
- The rangefinders used performed well up to about 400 yards. At 600 yards, the Bushnell TRS-4 and Nikon Prostaff were significantly better than the other rangefinders.
Supported Ranging Results
These results were based on ranging MOA, reflective targets at 200-yard increments from 600-2000 yards. A description of targets and scenarios is given below.
The rangefinders used were firmly attached to a sturdy tripod for this test, and it was conducted under low light conditions, which is ideal for optimal rangefinding performance.
Conditions were clear with a visibility of 10+ Miles. Each target was ranged ten times with each model, with each reading being recorded.
This test was designed to represent the best-case scenario for ranging 2 MOAs. Some of the rangefinders did not perform as advertised.
Before getting too cynical, we want to add that if you had been ranging the side of a mountain you might be able to get readings beyond what the manufacturers claim.
The Vectronix Terapin PLRF is a great rangefinder. It has a very high maximum range, and it is incredibly accurate. It has the lowest standard deviation of readings, and the lowest percentage of incorrect measurements. This rangefinder is worth checking out!
Vectronix Vector 23 Rangefinder is able to blow that away! It consistently gives accurate readings of over 30,000 yards in bright daylight. It doesn’t matter what kind of terrain or weather conditions you’re facing, the Vector 23 will always give you an accurate reading.
Leicas are great for long-distance viewing. They give you accurate results when you need them most. You can use them for hunting or shooting sports.
Zeiss Victory RF gives accurate readings even when shooting at close ranges. It doesn’t provide many inaccurate readings. It also has low standard deviations.
Binoculars are used to see distant objects. They are also used to see close objects. There are different types of binoculars. These are the ones that are used to seeing distant things.
The Leica Geovid HD is the clear winner among these three products. It offers world-class optics and an excellent price point. However, the Leupold RX-1,000i rangefinder falls short of its advertised maximum range. The Bushnell Fusion 1600 binocs fall even farther short of their advertised maximum range.
Note: If you want to know Sig Rangefinder Binoculars Why Discounted clicks HERE.
Bright Lighting Conditions
Rangefinders perform better when there isn’t much sunlight around.
The Vector 23 rangefinder is able to get accurate distance measurements on targets up to 18 miles away. This makes it much more useful than other models.
Vectronix Terrapins were able to read ranges up to 1 mile. They provided 9 out of 10 readings within this range. These ranged from 1760 to 1758.
This means that if you want to know how far away an object is, you should buy a Vectronix TerraPine.
Zeiss Victory RF closely mirrors Leica HD-B performance. Zeiss Victory RF exceeds expectations. Zeiss Victory RF gives accurate readings out to 1,000 yards.
Underperformers hang in right around where they are under ideal, low-light conditions. It is much easier to ignore the interference caused by radiation when it comes from farther away.
Rangefinders need to work harder to get readings in bright conditions.
Note: If you want to know How Do I Turn Off a Nikon Laser 600 Rangefinder Buckmasters click HERE.
Ranging Accuracy No Reads
The chart shows that the Nikon Riflescope Range Finder gives the highest percentage of correct readings. The Bushnell Elite Tactical Rifle Scope Range Finder gives the lowest percentage of correct readings.
The Leica Geovid HD classic camera gives an accurate range 46% of the times. For the 600-1,000 yard targets, the Leica Geovid Classic gives an inaccurate range of 46% of the times.
Both Vectronix models are very accurate. There were no errors in the readings. This data shows that the Vectronix models have a high accuracy rate.
Zeiss Victory RF is an excellent rifle scope for hunting. It gives you great accuracy and doesn’t miss many shots.
However, it does have a few problems. First, it sometimes gives inaccurate readings. Second, it may be too expensive for some people.
Leica HD-Bs gave very accurate readings. Only 8% of the time did the camera give an inaccurate reading. Most of these inaccuracies came when the camera was set up too far away from the subject. From 600-1760 yards the camera performed very well.
Bushnell 1 mile gives 20% incorrect ranges, most likely because of brush near and around the targets. The Bushnell 1 mile has a wide beam divergence, Both making it difficult to range one particular target consistently. This causes the Bushnell 1 mile to give inaccurate readings.
Note: If you want to know What Rangefinder Phil Mickelson Use click HERE.
How Do You See the Results on a Rangefinder?
Fusion Beam Divergence
Bushnell Fusion 1 mile has a beam divergence of 1.5x3mrad. This means that the light cone is wider than normal, but it is still narrow enough to produce a tight spot.
Bushnell Fusion 1600 has a beam divergence of 3x1mrad. This means the light cone is much wider than normal but still very narrow.
Long Distance Targets
Long-distance targets were usually set up using tripods. Offhand shots were taken using a rifle mounted on a bipod or monopod. Targets were set up in various locations such as woods, fields, etc.
Internal display
- Actual distance.
- Horizontal distance.
- Height.
- Angle.
- Height between two points.
- First target priority mode.
- Distant target priority mode.
- Battery condition.
- Distance.
- Unit of measure (m/y).
- Target mark.
- Laser irradiation.
External display
Height – Measurement Unit (m/yd./ ft.) 1.5 m / 0.5 yd. / 0.3 ft.
Key Features
Height, vertical separation, horizontal distance, and angle can be measured by using the laser rangefinder. The results are displayed both internally and externally on an LCD panel.
The external LCD panel shows all measurements simultaneously. There are two measurement modes (Target Priority switch system): target priority mode and manual mode.
In target priority mode, you can set the priority level of each target. The laser beam automatically scans the selected target when you press the trigger button.
You can also manually scan the target by pressing the trigger button repeatedly. In manual mode, you can measure the distance and angle of any point on the screen.
Conclusion
Target Priority Mode displays the distance to the nearest target taken with a single measurement. This mode is particularly useful for forestry and hunting because it allows you to see the furthest target without having to move your head.
Distant Target Priority mode displays the distance to the furthest target taken with a single measurement. This mode is particularly helpful when using a high-quality 6x monocular because it allows you to view the furthest target without moving your head.
We hope that this article was helpful. Feel free to reach out in the comments section if you have any queries.
If you want to know more information about rangefinder click HERE.
