How to Make Bluetooth Rangefinder Connect to Gps? – In-Depth guide with FAQs, Tips, Advice, & More

People often ask, how to make a bluetooth rangefinder connect to GPS?

Let’s find out!  

How to Make the Bluetooth Rangefinder Connect to Gps?

Bluetooth devices must pair with each other before they can communicate. This process is called “pairing.” Pairing requires two steps: discovery and connection. Discovery is the process of finding another device. Connection is the process of establishing communication between the paired devices.

How to Use Bluetooth Rangefinder?

Make sure the rangefinder’s bluetooth function is turned on and the device is connected to your android device. Open mapit and enable distance bearing method for new points in survey settings. Enable distance and bearing method.

When the distance and bearing method is active you can enable bluetooth rangefinder option. When enabled you’ll be asked to pick up your paired device. Please select your device as a source.

A blue circle appears around the icon indicating that the device is connected to the car.

This is an example of using the rangefinder to acquire the location of a target. You must first pair the rangefinder with the tablet. Then you must scan for Bluetooth devices. If the rangefinder does not communicate with the tablet then you need to re-pair them.

After scanning is complete, close and then reopen MapIt. This will allow you to communicate with your laser ranger. Populate values from your bluetooth connection. Use the map it mapit project points tool to populate the values into the fields.

Note: If you want to know a complete guide about rangefinder click HERE.

how to make bluetooth rangefinder connect to gps

How to Make Bluetooth Rangefinder Connect to Gps?

Hardware Specifications

This weight scale is very accurate. You can use it to weigh your pet dog or cat. It measures up to 3,280 feet (1000 meters), and you can even connect it wirelessly using Bluetooth technology.

This battery lasts longer than most other batteries. It is also safe for your eyes, and you can use it outdoors without worrying about getting wet or dirty. You can even use this battery while wearing glasses.

Note: If you want to know How to Use SLR Magic Rangefinder click HERE.

Display: In-scope display. Units: Feet (ft), Yards (yd), Meters (m), and Degrees (°).

Mapping procedure

When starting from a GPS point you can see your current position on the map. If you want to manually select a point, make sure you are zoom in far enough so that you can accurately place the mouse cursor on the desired location. Make sure the scale bar is visible in the lower right corner. You should be able to see about 1 meter on the scale bar.

Note: If you want to know How to Use the Russian Rangefinder click HERE.

Conclusion

Be sure a point shapefile can be edited. Use the Offset tool to set the reference point. Tap the fire button on the rangefinder to capture the reference point. You can now see the bearing, slope distance, inclination, and azimuth.

Note: if you want to know How to Use Shepherd Scope Rangefinder With Different Bullets clicks HERE.

We hope that this article was helpful. If you have any queries feel free to reach out in the comments section below.

If you want to know more information about rangefinder click HERE.

Author

  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!