How to Set Up Netgear Rangefinder? – Step-by-Step Guide with FAQs, Tips, & More

People often ask how to set up a Netgear rangefinder
Let’s find out!

How to Set Up Netgear Rangefinder?

There are two convenient ways for Netgear EX3850 setup

1. Connect with WPA/WPA2 Security: WiFi Protected Access 2 (WPA2) secures your wireless connection by using encryption technology.
2. Connect with the NETGEAR Installation Assistant: To use this method, you must launch a browser from a computer or a mobile device.

Note: If you want to know tutorials about rangefinder click HERE.

Netgear EX Setup WPS Method

Step 1: For the Netgear EX3700 setup (AC750), turn on your Netgear AC 750 EX3700 wifi range extender.

Step 2: Place it near your WiFi router.

Step 3: Connect your extender to an electrical outlet. Wait until the power LED on the extender lights green.

Step 4: Press the WPS button on the extender and wait for the Link Status LED to light up blue. If the Link Status LEDs are amber or red, move your extender closer to the WiFi router and try again.

Your extender connects to the router’s 5GHz band the first time. You should move your extender to another location if you want to use it again.

Connecting to an open wireless network is easy. You simply need to know the name of the network you want to connect to. To do this, type the name of the network into the address bar of your web browser.

Netgear EX Manual Setup

For the Netgear EX3700 setup guide you need to follow these steps

Step 1: Turn on your NetGear AC750 EX3700 Extender.

Step 2: Place your extenders close to your Wi-Fi router.

Step 3: Plug your extenders into an electrical outlet. Then connect your router to the extenders.

Step 4: Launch a web browser on a computer or mobile device. Enter www.mywifienetwork.com. The NETGEAR Installation Assistant displays.

Step 5: Follow the prompts to connect your Extender to your existing WiFi Network.

Step 6: Move your Extender to a new location if you get no connection or an unsatisfactory connection. Try moving your Extender closer to your router until the Link Status LED Lights White.

Step 7: Once you’ve found the best location for your Extender, connect your Client Devices to the Extended WiFi Network.

Note: If you want to know How to Wire Rangefinder CJMCU981 to APM26 click HERE.

Netgear EX Setup Using Nighthawk App

Not getting enough WiFi from your ISP equipment? Get a WiFi range extender and boost WiFi coverage everywhere in your house. Use the same WiFi name. With this mesh extender, you can improve the WiFi you already have and get better performance.

You can also use Netgear Nighthawk App to install your Netgear Nighthawk AC750 EX3700 Wi-Fi range extender and connect it to the internet. The Netgear Nighthawk APP is available for both major platform i.e. Android & iOS.

Following are the steps to perform Netgear Nighthawk Setup using the Nighthawk APP

Step 1: First of all, ensure that you have an active Internet connection.

Step 2: Note down the router’s SSID or network name.

Step 3: Now, turn on the Netgear AC750 EX370 extender.

Step 4: Download the Nighthawk app for Android or iOS devices.

Step 5: Open the Nighthawk app and follow the on-screen instructions to set up your NetGear WiFi range extender and get online.

Netgear EX AC Extender Setup Common Issues

A Netgear EX3700 router is not working properly. There may be several reasons why this happens.

1. You need to check if your Netgear EX3700 is plugged into an electrical outlet.
2. Make sure that there is the power supply to the device.
3. Try to connect the Netgear EX3700 to another computer or other devices to see whether the problem persists.
4. Try to use another Ethernet cable to connect the device to the internet.
5. Try to reset the Netgear EX3701 by pressing the Reset button located on the back side of the device.
6. Try to contact the manufacturer of the product to get more information about the issue.
7. If you’re having problems with mywifiex.net, make sure you entered the right URL into the address bar.
8. If you’re having problems with mywifiex.net, make sure you entered the right URL into the address bar.
9. Check if the wall socket is working properly. Try another wall socket if needed.

Note: If you want to know How to Use the X40 Rangefinder click HERE.

Netgear EX Firmware Update

Step 1: You need to download the firmware file.

Step 2: Then you need to extract the firmware file using any software or tool available on your computer.

Step 3: After extracting the firmware file, you need to copy the firmware file to the root directory of your Netgear EX3700.

Step 4: Now you need to restart your Netgear EX3701 manually.

Step 5: You should see the new firmware installed successfully.

Note: If you want to know How to Use Tour S Laser Rangefinder click HERE.

Conclusion

We hope that now you know how to set up your NetGear!

If you want to gain more information about rangefinder click HERE.