How to Use the Rangefinder on a PSO1? – In-Depth Guide with FAQs

People often ask, how to use the rangefinder on a PSO1?

Let’s find out!

How to use the Rangefinder on a PSO 1?

The rangefinder system on PSO 1 scope is very intuitive and easy to use. Look through the scope, in the bottom lest you will see a curve. The number on the horizontal line or X-axis shows the target height I’m meters. Locate your target, then place your scope line at the feet of your target and you match it not the curve so the head of the target fits onto the curve. It will indicate the distance of your target.

The rangefinder is one of the most important tools in the arsenal of any serious hunter. It allows you to accurately measure distances from your target to the rest of the world around you.

PSO-1 Scope

Design Details

Telescopic sights were originally used for military designated marksmen. These scopes feature a battery-powered red illuminated target reticle with light provided from a simple diode bulb and a professional ground, fully multi-coat optical elements.

The scope body is sealed and filled with nitrogen gas, preventing fogging of optics and designed to operate within a -50°C to 50°C temperature range. To zero the telescope, the reticle can be manipulated by adjusting the elevation and windage turret in 5cm increments.

The PSO-1 is considered the highest quality Soviet military side mount telescoping sight. It lacks a focus adjustment and parallax compensation control, but it does have an anti-reflection coating.

Most modern military tactical sights do not include any of those features. The PSO-2 includes a focus adjustment and parralax compensation control.

Note: If you want to know a complete guide and tutorial about rangefinder click HERE.

Bullet Drop Compensation Elevation Turret

The elevation turret features bullet drop compensations in 50m or 100m increments for engaging point and target areas at ranges from 100m up to 1000m. At longer distances, the shooter must use the vertical lines that would shift the trajectory 100m per line.

The BDC feature needs to be tuned at the factory based on the particular ballistic trajectory of the specific combination of rifle and ammunition at a given air density. Inevitably, BDC induced errors will happen if the environmental and meteorologic conditions deviate from the calibration conditions.

Marksmen can be taught to compensate for these errors.

Windage adjustments can be made by dialing in the horizontal position of the reticle. This is done by turning the turret clockwise or counter-clockwise.

PSO reticle

The bottom left corner of the PSO-1 can be used to determine how far away a target is. A 1.7m tall person is correctly ranged at 400 meters. The PSO-I features a reticle with floating elements designed for use in estimating bullet drop and drift.

A chevron (^) is used to aim the gun. Horizontal lines are used to measure the distance. The lower part of the target is aligned on the bottom horizontal line, and the upper part of the target aligns on the top curved line.

When the top of the target aligns with the top curved line, the distance can be measured. This reticle layout is also used in many other telescopic sights.

The three lower chevrons are used as holdover points for engaging area targets. To engage an area target, the user must set the elevation turret to the maximum setting of 1,000 meters and apply the chevrons.

Hash marks are lines that help you measure distance. In this case, they are used to measure how far away something is. They are usually seen on guns or other weapons.

A flashlight is used to illuminate the reticle.

Note: If you want to know Leica M3 Rangefinder How to Use click HERE.

Mounting System

A proprietary mounting system allows the user to adjust the position of the scope on the gun. The scope is mounted to the right side of the gun instead of the left side. The scope is offset to the left side of the barrel. The scope mounts to the gun using a dovetail style mount. The scope uses a proprietary mounting system. The scope has a castle nut that needs to be tightened or loosened to adjust the position of it on the gun.

The serial number of the rifle is engraved into the scope’s side mount. This means that the scope was made after the rifle.

Note: If you want to know Neo Golf Rangefinder and How to Add Courses click HERE.

Optical Specifications and Dimensions

Izhmash SVDS sniper rifles are used by Russian forces. A magnifying glass is attached to the scope to improve vision. The power source is a single AAA battery.

This is a very light weight robot. It has a size of 375x70x132mm.

Accessories

A lens hood reduces or eliminates image quality impairing stray lights, and a carrying case protects the sight during transport and store.

Note: If you want to gain information about Lofthouse Pro Nav Gps Rangefinder How to Charge click HERE.

how to use the rangefinder on a pso1

How to Use the Rangefinder on a PSO1?

Conclusion

We hope that this article was helpful. If you have any queries feel free to reach out in the comments section below.

If you want to know more information about rangefinder click HERE.

Author

  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!