Sig Kilo 1200 Rangefinder How to Go From Line of Sight to Angle? – Complete Step-by-Step Guide

People often ask, How to go from line of sight to angle in Sig Kilo 1200 Rangefinder?

Let’s find out!

How to Go From the Line of Sight to Angle in Sig Kilo 1200 Rangefinder?

To go from the line of sight to angle in Sig Kilo 12 rangefinder follow these steps.

Step 1: Press and hold the RANGE button to activate the rangefinder, then release it to enter programming mode.
Step 2: Press and hold the MODE button for two seconds once the display is displayed. When you let go, the current selection will flash (AMR is the default setting).

Step 3: Hold down the RANGE button and release it, you can change between LOS and ABU.

Step 4: Push and then release the MODE button, so you can save your setting.

Note: If you want to know a complete guide about rangefinder click HERE.

sig kilo 1200 rangefinder how to go from line of sight to angle

Sig Kilo 1200 Rangefinder How to Go From Line of Sight to Angle?

Angle Compensating Rangefinder – To Have or Not to Have?

Gravity is the third wheel that you can’t get rid of when shooting. You must account for it when aiming your weapon. Two distances need defining if you want an accurate shot: range and windage.

Line of sight is the distance between you and your target. True horizontal distance is the distance at which gravity will act upon. You must aim for this distance to get a perfect shot.

A bow is used to shoot arrows at targets. Gravity affects both the arrow and the target. There is a rangefinder that helps aim the arrow. People who use this rangefinder say it doesn’t make a big difference.

Bow hunters should practice their shooting skills before going out into the field. Rifle shooters need to know what kind of shots they’re taking. Both groups should practice their shooting skills in order to get better results.

You’ve got to throw high enough to make sure the ball goes into the bucket.

You’re supposed to put the bucket on top of the Ferris wheel. But it’s too far away! What should you do?

A rangefinder should be used when shooting at targets that are far away or if you’re shooting at a moving target. You’ll need to use a rangefinder to calculate the distance between your gun and the target.

Note: If you want to know What Batteries Do in Rangefinder Cameras click HERE.

Scenario

You should shoot for the center of mass (the middle) of the elk. When shooting at a moving target, you should use the same range as if you were stationary.

Aiming for the center of mass means the elk will be hit by the arrow or bullet. You should adjust your scope for a 10-degree field of view. A rifle shot travels faster than an arrow, so you need to compensate for this by aiming higher.

A rangefinder with angle compensation is a tool used to measure distances. It uses angles to calculate the exact distance to a target.

This tool makes shooting easier because it helps you determine the exact distance to your target.

Your rangefinder tells you the line of sight is 70 yards, but your true horizontal is 23 yards.

Note: If you want to know What Is Bushnell Rangefinder Jolt Technology click HERE.

For the Bow Hunter

The horizontal distance is 23 yards. Gravity doesn’t affect arrows shot vertically.

You need to compensate your trajectory by 47 yards if you want to hit your target. A 70% accuracy means that you’ll be off by up to 30%.

For the Rifle Shooter

For the firearm user, these ranges won’t matter much. You’ll be fine as long as you know how far away your target is. But if you’re shooting at a steep angle, you’ll need to compensate for the vertical distance. You’ll need to aim lower than normal.

Rangefinders with a ballistic calculator can tell you what your bullets’ holdovers will be according to your rifles’ zeros and the types of ammunition being used. Bullets drop faster when fired upwards than downwards. Aiming low is better than aiming high.

Where to Use Angle Compensation?

Both rifle shooters and bow hunters can benefit from using a rangefinder with angle compensation. Situations that they could prove helpful include: Rifle hunters with extreme distances.

Archers in tree blinds. Mountain goat hunting in a canyon. Rangefinding in mountainous areas. Range finding in unknown terrain.

Note: If you want to know How to Use Bushnell Medalist Rangefinder click HERE.

Conclusion

We hope that this article answered your question. If you have any queries feel free to reach out in the comments section below.

If you want to gain more information about rangefinder click HERE.

Author

  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!