Table of Contents
People often ask, why does my trueview lr800 laser rangefinder show x through the battery when I check distance?
Let’s find out!
Why Does My Trueview LR800 Laser Rangefinder Show X Through the Battery When I Check Distance?
This problem occurs because of rust or debris. The solution is to remove the battery cover and clean the contacts inside.
Bresser Trueview LR800B Laser Rangefinder
Bresser TrueView LR800B Laser Range Finder assures the guesswork has be taken out of the bow hunter’s shots, easy to use, perfect for shooting, 3D archers, golfers, police, SWAT, emergency services, construction workers, clear LCD readout, 1000 yard range, rugged, compact & accurate.
Description
If you’re into outdoor sports like hunting, shooting at targets, fishing, camping, hiking, etc., then you’ll appreciate having an accurate distance measuring device like the TrueView LR800B Laser Range Finder from Bresser. It lets you measure distances accurately to faraway things.
Success depends on knowing the distance between yourself and your target audience.
The distance is displayed by an LCD display overlaid onto the viewfinder image.
It’s easy to use the LR800B. You just press the “on” and “off” buttons to turn the unit on and off. Then you press the “yards/meters” switch to choose between yards and meters.
Lasers use pulses of light to measure distances. They calculate the distance from the speed of light and display the result on an LCD (liquid crystal display) monitor.
As its name suggests, the Bresser LR800B is rugged, compact, and uses a three-barrel design to accurately measure distances of up to 800 yards.
The LR800B uses a long-lasting 9V battery that is user replaceÂable.
It has an f/2.8 aperture, which means that it lets in less light than most lenses. However, it has a 21mm focal length, which allows you to get closer to your subject without having to move too far away from it
It has an adjustable focus, a rubberized top and front, long-lasting nine-volt lithium-ion rechargeable batteries, a carrying pouch, lanyards, and a lens cloth cover.
If you’re looking for an easy-to-use, waterproof, handheld rangefinder, then the LR800 from Bresser is the way to go. It’s so handy that once you get used to using it, you won’t be able to live without it!
- Maximum Range 800 yards on a reflective target
- Clear LCD readout
- Precision to +/- 1 yard
- 4x magnification
- Objective Lens Diameter 21 mm
- Field of View 1000 yards
- Optical Coating Multi-Coated
- Battery Type 9 Volt
- Weight 385.5grams or 13.6oz
- Colour Black
- Dimensions 4.75″ x 5.75″ x 2.5″ inches
- Bresser Hunters Specialties Primal Series Binoculars 10 x 42mm
How to Fix a Failed LCD Screen in a Trueview LR800
Here’s a step-by-step tutorial on how to repair a broken LCD panel on your Trueview LR800 rangefinder. You may need to adjust some steps depending on which version of the rangefinder you have.
If you are not familiar with Trueview, they are a company that manufactures lasers, binoculars, spotting scopes, and rifle scopes. These items are very popular among hunters for their high quality and durability
Step 1: Remove the batteries from the Trueview LR800. You don’t need to remove the batteries yet.
Step 2: Turn off the Trueview LR80 by pressing the power button at the back of the unit. Once the display turns off, press the power button again to turn the device back on.
Step 3: Press the Menu button (the one with the arrow pointing up) until you see the menu shown below.
Step 4: Select the “Display” option. You should now see the following menu:
Step 5: Select the “LCD” option. The next menu should appear:
Step 6: Scroll down to the bottom of the menu and select the “Check LCD”.
Step 7: A message box will pop up asking if you want to check the LCD. Click Yes.
Step 8: After checking the LCD, scroll all the way to the right and select the “OK” option.
Step 9: Your LCD should now be fixed.
How to Replace a Trueview LR800 Battery
Replacing a Trueview LR800 battery is pretty simple. All you need is a pair of pliers, some tweezers, a small screwdriver, and a 9-volt battery.
First thing first, remove the old battery from the camera by pressing down on the battery cover with your fingers. You can use the pliers or tweezers to pry it out gently. If you do not have any tools available, just pull the battery cover off using your hands.
Next, take the new battery and place it in the same spot as the old one. Make sure that the positive (+) end of the battery goes in the top left corner of the camera. Then push the battery firmly into place. It may take a few tries to get the battery fully seated.
Next, turn the camera back on and let it run through its normal startup routine.
Once the camera has finished booting up, go ahead and test the battery. Use the pliers or tweezer to hold the negative (-) end of the battery while plugging it into the charger. Wait for the LED indicator light to turn green before removing the battery.
You’re done! Now you know how to replace a Trueview LR800 9V battery.
Why Does My Trueview LR800 Laser Rangefinder Show X Through Battery When I Check Distance?
How to Clean a Trueview LR800 Lens
Cleaning a lens can be tricky. There are many different types of lenses used in cameras today. Some are made specifically for digital cameras, others are designed for film cameras. Regardless of what type of lens you have, cleaning it is easy. Here’s how to clean a Trueview LR800 lens.
The first thing you’ll need is a microfiber cloth. Microfibers are extremely soft and absorbent. You can find them at most stores like Walgreens or Target. They’re also sold online as well.
The best part about using a microfiber cloth is that they don’t leave any residue behind on the camera. If you use a regular cotton cloth, you may end up with some residue left behind.
Next, you’ll want to remove your lens cap. This will help prevent dirt from getting inside the lens. Once you’ve removed the cap, wipe down the outside of the lens with the microfiber cloth. Be sure to get all the dust off the lens.
Now, take the microfiber cloth and place it over the front of the lens. Gently rub the cloth back and forth across the surface of the lens. Do this until there aren’t any more particles stuck to the cloth. Then, rinse the cloth under running water.
Now, repeat steps 1-3 above but instead of wiping the lens, spray it with a little bit of compressed air. This helps blow away any remaining debris.
Finally, put the lens cap back on and snap the camera shut.
Conclusion
We hope that this article was helpful. If you have any queries feel free to reach out in the comments section below.
