How to Calibrate a Scope – Full Guide with FAQs, Discussions, Tips, & More

Are you confused about how to calibrate your scope without going to a professional?

If yes, then you don’t need to worry because we have you covered in this guide.

So without wasting any time let’s get straight into it.

How to Calibrate a Scope Shooting and Testing?

1. You should place your rifle on a rest when shooting it. This eliminates any human errors. A gun rest is an item used to support a firearm during firing. There are many different types of gun rests. Some are designed to hold the barrel of the rifle while others are designed to hold the stock of the rifle. Gun rests come in many shapes and sizes. Some are made out of metal and some are made out of wood. Some are designed to fit into specific positions such as on a wall, table top, or other flat surface. Most gun rests are designed to hold the muzzle end of the rifle.
2. You should always aim downrange when you’re shooting. A good place to do this is at the shooting range. When you’re ready to fire, load your rifle and check if everything is working correctly. Then, take some shots at the target.
3. You must be able to see the target before shooting. You must be able to adjust your scope properly.
4. You should always try to shoot at different distances. This helps you learn how the scope works and what adjustments need to be made.
5. You can shoot at targets at distances up to 100 yards. However, if you’re going to be doing this for hours, you may want to practice closer to 20 yards first. This is because your accuracy will improve faster when you’re close to the target. Also, you’ll need to spend more time practicing.

Note: If you want to gain a complete guide about scopes click HERE.

The Scopes You Should Calibrate

Most of the time, we suggest that shooters should learn how to calibrate their scopes. Precision riflescopes usually come in handy when the distances between you and your target exceed 250 yards. You must know how to zero the scopes properly by manipulating their elevation or windage turrets.

Friction-adjustable scopes are less accurate than precision-adjusted ones. Precision-adjustable scopes require calibration to work properly.

Turrets of such scopes should be set up in a way to zero them at 200 yards. This is enough for hunting purposes. As long as the shooting distance ranges between 0 and 250 yards (0 and 500 meters), these scopes would let the shooter hit their targets without fail. A 6 to 8-inch grouping is achievable.

Adjusting for parallax means keeping your camera steady as you move around. This makes sure that the picture looks the same when viewed from different angles.

Note: If you want to gain information about How to Sight in a Leupold Muzzleloader Scope Click HERE.

The Installation of the Base Mount

You should use a scope with mount before you can calibrate it. Stay focused while installing the mount. If you make a mistake during calibration, your scope will be less valuable. Don’t spend too much time trying to save money when buying a scope. Spend some extra money to get a nice mount.

A quality mount is capable of holding a scope securely for years to come. Mounts should be tightened using an X pattern so the telescope doesn’t get pulled out of alignment.

You should loosen the screws slowly at first, and then speed up later on. Don’t worry about rushing the process, because there is no need to hurry. Take your time and do things correctly.

Note: If you want to know Who Makes Leatherwood Scopes? Click HERE.

Attaching the Scope to the Mount

After the base mount is properly tightened, the next step is attaching the rifle scope. Place the scope on top of the mount according to the manufacturers’ instructions. Then simply tighten the rings. This should allow you to see a sharp and clear target image through the eyepiece.

A crosshair should be centered on the target. You should loosen the screws until the crosshair is centered. Then you should tighten them by half a turn at a time.

Crosshairs should be moved around by pressing the mouse button.

Note: If you want to know How to Sight in a Nikon Buckmaster Scope Click HERE.

Range Card Calibration

Range cards must be very accurate to give you a clear view of where your bullets will go when you pull the trigger. You need to make sure that your range card is very detailed.

Range cards give information about the distance of targets. If you want to make a more accurate shot, use a range card.

Conclusion

We hope that now you know how to calibrate a scope.

If you want to know more information about scopes click HERE.