Table of Contents
People often ask, How to mount a Scope on Mosin Nagant?
We are here to answer that so stick around!
How to Mount a Scope on a Mosin Nagant
- Install the scope with the barrel pointing down.
- Remove the rear sight and insert the scope.
- Replace the rear sight.
- Put the barrel back in place.
What Are Some Of The Top Mosin Nagant Scope Mount Options?
Brass Stacker Universal Fit Scout
Brass Stacker Universal Fit Scout scope mount for the Mosin-Nagants is the best scope mount for the Mosins. It is made by Rock Solid Industries.
There are many different types of scopes available for rifles. Some of these scopes are very expensive. You need to know how to choose the right type of scope for your gun.
Note: If you want to know a complete guide about scopes click HERE.
Bolt Throw
The bolt handle of the Mosin-Nagan doesn’t fit traditional mounts.
There are only two ways around the problem. You can bend the bolt handle, or replace it entirely. Or, you can mount your scope in a more unconventional position.
Drill and Tap
The Mosin Nagant scope mount requires drilling and tapping. This is a big deal because it takes time and effort to make these adjustments. Most people won’t bother making the changes needed to put the scope on the rifle.
Installing a Scout Style Scope on a Mosin Nagant
A Mosin Nagant rifle with a scope mounted on top of it is very useful. You can shoot the target easily and accurately.
Use a steel punch to drill out the pin. Be careful not to damage the sight.
The pin is most of them away, the spring pressure on your punch will push the sight up. Carefully remove the sight and spring before continuing. Place the flange nut into your sight holder. Properly placed, it should appear as in the picture above.
Next, place the actual rail into the sight box and put one of the screws through where the pin used to be, and gently thread it into position but do not tighten it yet.
Ensure that the flange nut lines up with the countersunk holes in the top of the rails and then screw it into position with the countersunk screw until it is just snug.
Then, turn the screws through the other side of each pinhole until both sides of the pins are snug before backing out another 1/4 turn and tightening them down.
How to Mount a Scope on a Mosin Nagant?
Description of Mosin Nagant Scope Mounts
Scope mounts are used to attach a telescopic sight to a rifle. There are many different types of scope mounts available.
This article provides an overview of the most common type of scope mounts, including some of their advantages and disadvantages.
Bipods are used to stabilize rifles when shooting them. These devices are usually attached to the rifle using a quick-release mechanism.
Why Should I Mount A Scope on My Hunting Rifle?
A gun scope is used to help hunters get closer to the prey.
Target Magnification
Riflescopes make it easier to see what you’re shooting at. You can also use them to see things that are close by. This helps you avoid accidentally hitting something else when you shoot.
Low Light Shooting
Riflescopes help to decrease light, making it easier to see in bright conditions. When you use a riflescope, it’s ideal for hunting during early morning or late evening hours, which is the perfect time to focus on the big game.
Increased Shooting Precision
Riflescopes have visual markers. They help you aim better by showing where the bullet will go. Crosshairs are used to show the shooter where the bullet will go when he pulls the trigger.
Conclusion
We hope that now you know how to mount a scope on your Mosin Nagant. If you have any queries feel free to reach out in the comments section below.
If you want to know more information about scopes click HERE.
