Mounting is easy when you know a proper way to do it.
It is a question asked by many.
Let’s find out together!
What is the proper mount and screws for my Savage Centerfire Rifle?
You need to determine if your Savage Centerfire Rifle is a:
- Savage Model 110
- Savage Model 120
- Savage Model 130
- Savage Model 140
- Savage Model 150
- Savage Model 160
- Savage Model 170
- Savage Model 180
- Savage Model 190
- Savage Model 200
- Savage Model 220
- Savage Model 240
- Savage Model 250
- Savage Model 260
- Savage Model 270
- Savage Model 280
- Savage Model 290
- Savage Model 300
- Savage Model 310
- Savage Model 320
- Savage Model 330
- Savage Model 340
- Savage Model 350
- Savage Model 360
- Savage Model 370
- Savage Model 380
- Savage Model 390
- Savage Model 400
- Savage Model 410
- Savage Model 420
- Savage Model 430
- Savage Model 440
- Savage Model 450
- Savage Model 460
- Savage Model 470
- Savage Model 480
- Savage Model 490
- Savage Model 500
- Savage Model 510
This cartridge contains two different cartridges. The first cartridge is.300 Winchester Magnum (1.9 oz) and the second cartridge is.300 Winchester Short Magnum (2.3 oz). Both cartridges are loaded with 2.5 grains of IMR 4064 powder.
This rifle uses a.300 Winchester Magnum cartridge. It has a medium-length barrel. It has a high magnification objective lens. It has an extra-high power zoom eyepiece. It has a heavy recoil spring. It has a heavy stock. It weighs about 2.5 pounds.
Note: If you want to know a complete guide about scopes click HERE.
![How to Mount a Scope on a Savage 22](https://theoutdoorstores.com/wp-content/uploads/2022/01/54.jpg)
How to Mount a Scope on a Savage 22?
What height scope rings do I need for my Savage Scope Mounts?
A simplified method of determining required scope height. Using some sort of shims (i.e. coin, washer, magnet) stack up the required amount of shims to achieve the desired scope height. Verify the final height does not interfere with the operation.
Note: If you want to know How To Look Through A Rifle Scope click HERE.
Torque Recommendations
Cap screws should be tightened until they’re snug but not too tight. Never tighten them beyond the scope manufacturer’s specifications. Verify with the scope manufacturer what the maximum allowable torque is before you start tightening your screws.
Torque should be checked by the gunsmith before mounting a scope. Make sure you use a torque wrench that is calibrated. Never exceed the recommended torque setting.
Note: If you want to gain information Where are Monstrum Scopes Made? Click HERE.
Loctite
Loctite is used to secure screws into receivers. Loctite Blue 242 is recommended. Do not use Loctite on the screws going into the ring. Test fit before applying Loctite.
Note: If you want to know How to Clean a Rifle Scope Lens click HERE.
Conclusion
We hope that now you know how to mount a scope on Savage 22!
If you want to know more information about scopes click HERE.
Author
-
John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.