How to Use Nikon P 223 Scope – Full Analysis, Tips & More

If you have a Nikon P 223 Scope but you don’t know how to use it …

We are here to help.

So, let’s go.

Mount Up

A ringed scope mount is essential for any rifle owner. You need to attach your optic to your gun securely.

This rifle is machined from a solid piece of aluminum and secures onto a standard Picatinny rail. It features enough of an offset cantilever to allow proper head position and enough adjustment to get the correct eye relief dialed in. It doesn’t feature a built-in MOA/Mil angle, which makes it ideal for use with the Nikon BCD reticle.

All wrenches required for mounting the scope are included with the scope bases, so putting everything together should be easy. The entire Nikon M223 mount setup is solid, simple, lightweight, and would be a good choice for most 1″ AR-15 scopes. It’s a perfect fit for the M- 223 and P-223 lines!

Note: If you want to know a complete guide about scopes click HERE.

Physical Description What’s In the Box

Both weapons are well made and easy to operate. They come with clear instructions and spring-loaded flip-up scope covers.

Soft lens cloth and an anti-reflection device (ARD) are included in the M-223. These items reduce the shooter’s visual signature. The ARD threads directly into the front objective housing of the optic, eliminating the possibility that a sharp-eyed predator could see the lens reflected in sunlight.

The forward flip-up cap is incompatible with the KillFlash. This is a problem because the lens is covered by a thick aluminum mesh when the camera is used. Both scopes are attractive and feature deep matte black finishes, well-executed accents, and great built quality.

Note: If you want to gain information Where are Monstrum Scopes Made? Click HERE.

Nikon’s BDC Reticle

These scopes are designed for use with the.223 caliber round. They are built around the Nikon BCD 600 reticle and will work on any rifle that uses the.223 caliber round (including the AR-15). These scopes will provide accurate drop compensation up to 600 yards.

The BDC 600 is designed for use with a 55-grain polymer tip bullet moving at a respectable 3000 fps. It works well with a 100 yard zero, but it’s best to call an expert if you want the most accurate results.

This website is very helpful in finding out what your specific load does. You can enter your information and see how it compares to others.

These two scopes are both second focal plane models. At the highest magnification setting, the holdovers are correct. But when zoomed out, the holdovers become incorrect.

The BDC 600 reticle offers great power for long-range shooting. It’s compatible with Nikon’s online software, making it easy to use.

Eyebox and Eye Relief

Both scopes feature a very favorable eye relief of right around four inches, as well as adequate eye box fields. While the eye-relief stays constant as the zoom level increase, the usable eyebox decreases significantly towards the top end. This is to be expected to some degree with any riflescope, and the M-2223 and P-2223 provide enough eyebox wiggle room to make conventional shooting positions easy and comfortable.

Optical Quality Comparison

Both rifle scopes are great for the price. They show bright colors and clear images. The M-223 is slightly more expensive than the P-223, but it gives you more brightness and better image quality.

Parallax Zoom and Reticle Focus

The M-223 has a locking parallax adjustment while the P-223 doesn’t. The M-223 has more zoom rings than the P-223.

Both scopes allow shooters to bring the BDC600 reticle into perfect focus by turning the adjustment ring. The M-223 takes more than twice as many turns to get there. Both scopes are very usable and well built.

Turret Details

Both the M-223 and the P-223 offer 20 MOA of adjustment. However, the M-223 gives you more than double the amount of adjustment. Turret movement is also firm and distinct on the P-223.

Both models have tool-less resettable. Pulling up on the target knob rotates the turret freely until it reaches the zero mark. A spring then pushes the turret back into position. The P-223 model has a spring that helps keep the turret in place while the M-223.

Note: If you want to know How To Look Through A Rifle Scope click HERE.

How to mount Nikon P correctly?

Nikon makes great cameras and lenses. Their products are easy to use and very affordable.

Step-by-step guide for installing Nikon P-223 Rifle Scope. For all P-Series rifle scopes of Nikon, two mounting rings/pieces are required to fix at an AR rifle. If you already have mounting rings available with the earlier version of the P-Series scope, you can use them for mounting the P- 223 scope as well. If you’re using the riflescope for the first time, just buy 2x mounting rings from any trusted Dealer of Nikon products.

First of all, mount the scope on the gun. Use screws to fix them in place. Measure the distance between the two rings. Then tighten the rings using a screwdriver or similar tool.

After tightening the screws, put the upper lobe of ring pieces over the tube and tighten them with a screwdriver. Don’t exert any force to tighten the screws. Tighten them just enough to finish the movement of the scope.

Safety mounting measures should be done last when mounting the scope on the rifle. Fixing the rings first can damage the internal parts. Never twist or turn the scope while mounting it on the rifle.

After entering the rings in the rail slot, tighten them as tight as possible to finish the movement of the scope on rails. This movement causes an obstacle during your shooting missions. As you know the riflescopes are made with thin layered aluminum material relatively sensitive. While tightening the screws tightly and don’t apply any additional force. Tightening the screws too hard could cause the weight of the tubes to become heavier.

While fixing the scope on a gun never remove the lens lid, because you could damage the lens of the scope if you do.

Note: If you want to know How to Clean a Rifle Scope Lens click HERE.

How to use Nikon P Rifle Scope perfectly?

Nikon makes great products that are easy to use. A new user can quickly learn how to use Nikon rifle scopes. The BDC 600 reticle settings help you to aim at a long distance. The parallax setting allows you to shoot accurately at a longer distance. Hash marks from 100 to 600-yard range provide you with circles as aiming points.

A quick zero-in setting is useful for fast shooting. When you shoot quickly, you may need to adjust the elevation or windage settings. You should remember to hold the gun in a way that the eyepiece is protected by the scope body.

For a static firing mission, the BDC 600 reticles are recommended. You can set your target range quickly during tactical and hunting missions.

How to maintain Nikon P AR rifle scope?

Keeping in mind the usage of P-233, Nikon has made this item with reliable material but maintenance needs to be done regularly to keep the scope serviceable. Cleaning and maintaining the scope ensures the proper functioning of the product and helps to keep the scope serviceably.

Clean your rifle scope after every use. Make sure to wipe off any dirt or dust before using the scope again.

Riflescopes should be handled carefully. Don’t throw them around. Keep them in their case when not in use.

A rifle scope lens should be cleaned regularly by using a soft cloth moistened with alcohol or lens cleaning paper. This will help to prevent scratches on the lens.

A rifle scope should be cleaned regularly to maintain its brightness and beauty. There is nothing special about cleaning an external part of a rifle scope. Just use soft and clean cloths to wipe off any dust or fingerprints.

Scope Cover

Scope covers protect your Leupold scope from dirt and damage. You can use them in storage or the field. They’re available in many sizes to fit different Leupold scopes. The scope cover is made of waterproof, nylon-laminated Neoprene. Keep your scope in storage or the wild.

Vortex Optics Defender Flip Caps

These flip caps are very useful when you want to shoot at different angles. You can use them to insert your dope disks. They are made in the United States.

High Accuracy Angle Cosine Indicator

High-accuracy angle cosine indicator helps shooters to get perfect eye relief. Bubble level which can be flipped over also helps shooters to have an extra indicator for obtaining much better clarity.

Conclusion

We hope that you now know how to use a Nikon P 223 Scope.

If you want to know more information about scopes click HERE.