Table of Contents
People often ask, when was Bushnell Pro x2 Rangefinder introduced?
Let’s find out!
Bushnell Pro X Laser Rangefinder Launched
The Bushnell Pro X is an amazing laser rangefinder. It shows slopes and distances quickly and easily. It is also very accurate.
The Pro X2 will be available alongside the Tour V4 and the Pro X7. The Pro X2 will feature a unique technology called Slope-Switch. This technology allows you to quickly switch between normal and slope-adjusted distances.
Slope-switch technology makes the Pro X2 the ultimate laser rangefinder. It ensures the device confirms local rules 14-3/0-5 when slope mode is turned off. This gives complete peace of mind to the user. One can use the same device, both for practices and competitions.
Bushnell Tour V3 laser rangefinders are great for golfers who want to measure distances up to 300 yards. These lasers are compact and lightweight, making them ideal for travel.
The Pro X2 has features such as:
- It has a range of up to 5,000 yards.
- This rangefinder is fully waterproof.
- The range speed is up to 300 yards per second.
- It has a range precision of up to 0.1 yards. It has a vibration function to locate flags.
- A dual display technology that allows you to switch between two different displays. This feature makes it easier to use your device when you’re outside.
Note: If you want to know a complete guide and tutorials about rangefinder click HERE.
Introduction
This device is made for golfers who want to be more accurate than others. It is very light and easy to use. It has a lot of features that make it great.
The Pro X2 emits infrared light pulses. These pulses travel instantly and accurately to measure distance. It uses sophisticated digital technology to calculate distance.
Ranging Accuracy
The Pro X2 is accurate within 1 yard/meter. The maximum range for most objects is 1000 yds / 914 meters while for highly reflective objects the maximum is 1300 yds / 1189 meters.
The color, surface finish, and size of the target all affect the range of the device. Bright colors allow greater ranges than dark ones. Shiny surfaces provide better ranges than dull ones. Smaller targets are harder to range than larger ones. Ranges are affected by the angle of the target. Angles closer to 90 degrees provide greater ranges than angles closer to 0 degrees or 180 degrees. Lighting conditions also affect the range of the weapon.
A laser rangefinder is an advanced device that measures the distance to a target. It uses lasers to measure the distance to a target. This device is used by police officers to determine if someone is hiding behind a wall or in a closet.
When Was Bushnell Pro x2 Rangefinder Introduced?
How to use the Bushnell Pro x2 Rangefinder
To use the Rangefinder follow the steps below
Step # 1: Press the power button, now the laser beam is activated.
Step # 2: Aim the laser at your target before releasing the power button. The laser beam disappears when the power button is released.
Step # 3: Press and release the round “B” logo plate to switch back and forth between the two displays. This product has dual displays, allowing you to switch between a vivid red display and a crisp black display.
A laser rangefinder is an electronic instrument used by military forces to measure distances. This device allows you to see how far away your opponent is without having to use binoculars or other optical devices.
Note: Did You Know Bushnell Rangefinders Use 3 -A Volt Lithium Battery (CR2)?
Slopeswitch Technology
Slope Switch technology lets you easily switch slope on and off. This allows you to use Slope to get compensated distance around the course when you want it and have a U.S.G.A. conforming device that is legally allowed for tournament play when you need it.
Display Indicators
Your Pro X2 display incorporates four illuminated indicators:
- PinSeek™ Indicator
- Aiming Reticle
- Battery Life Indicator
- Distance Displayed in Yards/Meters
Battery Life Indicator
A full charge means you have plenty of time before your battery runs out. Your battery indicator blinks when it needs replacing. You need to insert the new battery first, then replace the battery door.
Laser pointers are used by people who want to show something to someone else without actually pointing at them. This device allows you to point at things without actually having to point your finger at them.
The device works well in most situations. However, if there are too many objects in the line of sight, it will not work properly.
When pressing the power button, you can move your device slowly from one object to another to make sure that the laser hits more than one object. After the laser shuts off, it defaults In back to the last mode.
Display Brightness Receive VDT
The Pro Xa2 has vivid display technology. The bright red LED displays dramatically improve contrast, clarity, and transmit light while increasing the brightness of the display, making distance readings legible in low light environments.
The existing brightness setting is flashing (i.e. BRT1, BRT2, BRT3, or BRT4). Pressing the mode button will toggle between the 4 brightness settings. BRT1 is the lowest intensity while BRT4 is the brightest.
Simply press the mode button until the desired brightness is displayed, then press and release the power button to save the setting
Unit of Measure Options
The Pro X2 measures distance in both yards and meters. The unit of measurement indicators are located in the bottom right portion of the display, and there are two measuring settings to choose from. Following are the steps to choose from the measuring settings.
Step # 1: Look through the eyeglass, depress the Mode button, and hold it down for about three seconds to get into the Setup Menu.
Step # 2: Briefly press the Mode button to toggle through the brightness settings if you’re looking at the bright red LED display.
Step # 3: Press the power button to go to the unit of measure option, and again briefly press the Mode button to set your choice. A change in the unit will be indicated by the indication of the M for Meter indicator while the Y for yard indicator is turned off. If you’re switching from meters to yards, then the opposite will happen.
The Pro X2 returns to the last unit of measurement setting used each time the device is turned on.
When you enter the SETUP menu, you can select your mode of operation by pressing the “Mode” button. You can also change settings by pressing the “Power” button while in the SETUP menu. Once you exit the SETUP menu, the device automatically returns to normal operation.
ESP On/Off
ESP 2 enables you to see distances to a tenth of a foot or meter. You can choose whether or not to display them as fractions of a foot or meter by selecting ESP off or ESP on.
Two-Year Limited Warranty
Your Bushnell® laser rangefinder is guaranteed for 2 years. You can get your replacement if there is any problem with the device. But, you need to pay shipping charges.
The return made under this warranty should include the following:
- A check or money order in the amount of 10 dollars to cover the cost of shipping and handling.
- Your name, address, and daytime phone number.
- A copy of your dated proof of sale.
Do not send the accessories (case, battery, strap, etc.), only send the product for repair! The product should be well packed to avoid damage during shipment. The product should be sent to the address listed below. Bushnell® Outdoor Products, 140 Great Gulf Drive, Unit B, Vaughan, Ontario L4k 5w1.
The Bushnell warranty gives you specific legal rights. You may also have other rights which vary by country. ©2017 Bushnell® Outdoor Products NOTE: The serial number on your Bushnell Golf Laser Range Finder should be located on the back of the product, or on the box.
If you are unable to locate this sticker or if it has been obscured, the unit may not be genuine (authentic) or it may not have been purchased through an authorized dealer.
In either case, Bushnell will not honor warranties on this product. You should return the product to the seller for a full refund, and purchase your golf laser rangefinder from an alternate source.
Troubleshooting the Bushnell Rangefinder
If the unit does not turn on display does not illuminate try troubleshooting your Rangefinder following the steps below.
Step # 1: Depressed power button.
Step # 2: Check and replace the battery.
Step # 3: Replace the battery with a good quality lithium battery.
Step # 4: Cover objective lenses to see if the display is on.
Step # 5: If the unit does not respond to key presses, replace the battery with a good quality 3-volt lithium battery.
FCC NOTE
This equipment complies with FCC regulations. It doesn’t interfere with other devices. You should turn it off when you’re done using it.
Conclusion
We hope that now you know when Bushnell was released.
Let us know in the comments section below if you have any queries.
If you want to know more information about rangefinder click HERE.
