How to Mount a Scope on a .22 Rifle without Rail? – Easy Guide, Tips, FAQs & More

You are probably here because you own a .22 Rifle or maybe you are just curious about how to mount a scope on a .22 rifle without rail.

Either way, we are here to help.

This article is all about mounting a scope on a .22 Rifle without rail.

So, let’s go!

Some Things You Will Need

You should buy your rifle first, then get the scope later.

Mounting rings and rails are needed for scopes. You need to get these things done by a professional gunsmith or else you’ll end up ruining your rifle.

Note: If you want to know complete tutorials and tips about scopes click HERE.

How to Install a Scope on a .22 Rifle by a Gunsmith

A gunsmith needs to:

1. Drill and tap for a base plate
2. Install the base plate and rail
3. Install the scope

Note: They must be precise to make sure everything fits together perfectly.

Boresighters are used by gunsmiths to check the alignment of guns before firing them.

How to Mount a Scope on a .22 Rifle Without a Rail

The first step is to determine if your rifle has a removable stock. If it does, remove the stock and look at the bottom of the receiver. There should be two holes, one near the front and one near the rear. Remove the screws from both of them and pull the barrel forward. This will allow you to see the inside of the receiver. Look for a small hole near the top of the receiver. This is where the scope mounts.

Step 1 – The Smart And Easy Way

You need a scope base and rail before mounting a scope. A gunsmith can help you attach them to your rifle.

Note: If you want to gain information What Scope do Navy Seal Snipers Use? Click HERE.

Step 2 – Drill And Tap

A gunsmith will take your rifle and secure it in a vice. He will then place an alignment jig on top of the rifle and drill the holes in a perfect line. This ensures that the hole lines up perfectly and won’t be off by even a millimeter.

• Step A is drilling holes into the barrel of your gun.
• Step B is adding a base plate.
• Step C is attaching the grip.

Step 3 – Base Plate

Installing the base plate is pretty easy. You’ll need to use Loctite to make sure there aren’t any leaks. Also, before screwing down the baseplate, you’ll want to make sure there isn’t any moisture under the mount.

Step 4 – Rail

You can now attach the rail. This will be a permanent fixture. Depending on what type of rail is installed, this could be a semi-permanent fixture.

Step 5 – Boresighting

Once you’ve got your scope set upright, it’s time to bore-sight. Put a laser bore sighter into the rifle and make sure everything is aligned correctly.

More tips for you…

The best way to mount a scope on any firearm is to find out what type of scope mounts are available for that particular gun. Some scopes come with built-in mounts, but most will require additional mounting hardware.

Note: If you want to know Where are Huskemaw Scopes Made? Click HERE.

Modern Innovations in Rails and Scope Rings

As time passed, the Picatinny rail was used more often than Weaver mounts, and then drilled and tapped scope mounts dried up. So people started making their own mounts.

Scope rails come standard almost everywhere these days. It’s not impossible to get a rifle without a rail. Exceptions to this include Ruger rifles. Ruger has developed a system that uses a unitized base and a scope ring setup all in once and is machined to fit the unique Ruger machinings on both handgun rails as well as rifle receivers alike.

A Ruger system is a rifle that uses a screw-in base plate instead of a traditional barrel nut. This type of mounting system is called a base mount. A base mount allows you to use any standard 1/2×28 thread scope or other optics.

Factory Install

Pre-drilled holes are standard sizes for scope bases. Scope manufacturers can make adjustments based on the brand name of the rifle. Buyers need to install the bases themselves.

When you buy a scope, you need to know what size base plate you need. You also need to be sure you get the right size screwdriver. In addition, if you want to install the scope yourself, you’ll need to know how to do it.

Note: If you want to know Where are Barska Scopes Made? Click HERE.

A Word of Warning

Don’t install your own screws! We recommend using a professional installer who knows what he or she is doing. A professional installer will use a jig to ensure proper alignment and drilling accuracy.

Leave this work to the pros. Especially if you’re dealing with a vintage gun that has sentimental or collectible value. Don’t ruin your grandpa’s old Cooey Model 60 by trying to make it shoot better than it does now.

Considerations

When you’re mounting optics to guns that weren’t originally designed for them, there are some things to consider. You should make sure that the optic mounts properly and doesn’t interfere with the original design of the gun. Also, you need to make sure that the optic is compatible with the rest of the gun.

Types of Rifle Scope Mounts

Your new scope is an upgrade over your old one. You’ll get better accuracy than ever before.

Scope mounts come in many shapes and sizes. You need to make sure that your scope fits onto your gun before attaching it. If you don’t, you might end up having to buy a whole new scope.

1. Robust and simple, one piece mounts are a popular type rifle mounts. They eliminate the need to align the scope, which makes it very convenient since you can install it yourself and won’t have to worry about getting things dialed in just right, but they’re a bit heavy and may require a railbase.
2. Scope rings are smaller, lighter, and cheaper. They’ve been around longer than one-piece mounts. They’re a little more difficult to attach, and they also allow more freedom than one-piece mounts do. For example, if you’re doing distance shooting, scope rings can tilt, and one-piece mount can’t.
3. Weaver scope mounts are one of the most popular scope mounts today. They’re made up of two pieces of metal that are screwed together and then mounted onto the gun. Weaver scope mounts are available in both one piece and two piece designs. The two piece design is more expensive than the single piece design, but it allows for easier swapping out of scopes.
4. Picatinny scope mounts are based on the original Weaver designs. They were designed by and for the military, but they are now used by civilians as well. These mounts are made to exact specifications and tolerancing so that they are a universal system. All picatinny-mounted scopes will be interchangeable, even if they are different makes or models.
5. Picatinny scopes can be mounted on Weaver mounts. But not always. Weaver scoped rifles can be mounted on Picatinny mounts. But not always.
6. Dovetail scope mounts are very popular among shooters. They allow easy changing of optics since they just slide on. They’re named for the triangular shape they take when viewed from above. Optics will slide into the end and then have locking mechanisms to hold them in place
7. Dovetail rings are a special type of scope mount. You can remove these rings by loosening the screws enough to slide them off the rails. Other types of scope mounts do not have enough play when the screws are loose to allow them to come off the rails.
8. A mount and ring system that twists into place but still lets the rear of the scope move left and right. Adjustment screws allow for windage adjustments. This is a complicated base system that lets you adjust the rear right or left to account for windages.

Leupold Scope Mounts

Leupolds are great rifles for long-range shooting sports and hunting. They are sleek and strong. They are easy to use.

Tipoff Mount

The tip-off scope comes with a variety of sizes and types of bases. There are many different options available.

This is a great rifle for hunting. You can use it if you win a 0.22 rifle at an auction. The installation of the scope on this mount is very simple, and you can easily remove and replace the scope without using any complex tools or tools. If you want to shoot a medium-range with another gun, you can have this mount for your scope.

Dovetail Scope Mount

Dovetail rails are used to attach scopes to rifles. They are usually made of aluminum or stainless steel. These mounts are designed to hold a scope securely without affecting the rifle’s accuracy.

You can turn the ring to a 90-degree angle with the help of an instrument. This allows you to remove and place your spotting scope from the mount according to your needs.

Picatinny Rail

A Picatinny rail is an accessory that allows you to attach your scope to your gun. You can use this rail to attach your scope to any type of firearm. This rail is very useful because it lets you quickly attach your scope to your rifle without having to do anything else.

A Picatinny rail is used for mounting accessories such as scopes or lasers. This type of rail is used mainly by military personnel.

A Picatinny rail comes with a locking bar which helps to avoid more surface contact. Bipods also cause canting issues.

Conclusion

The conclusion is that the best way to mount a scope on any firearm is by using a mounting system designed specifically for that purpose. It will provide the most accurate results and it will save you money in the long run.

If you want to know more information about scopes click HERE.