How to Cerakote a Scope – Full Analysis, Tips & More

People ask a lot of questions about scopes and this is one of them…

How to cerakote a scope?

Well, no need to worry. We are here to help you out.

What is Cerakote?

Cerakote is a protective coating for firearms. It can be applied to metal parts such as barrels, receivers, and other components. It is usually used to prevent corrosion and scratches. Cerakote is also available in various colors including black, silver, gold, and more.

Cerakote protects the surface from rust, keeps the surface clean, and keeps the scope free from dust and dirt, but also makes the scope look great. There are over 100 different colors to choose from.

Note: If you want to gain a complete guide about scopes click HERE.

Can you use Cerakote on rifle optics?

Cerakote is an air-dry ceramic coating that requires baking before application. Cerakote C-Series doesn’t require baking, but you should wait about 10 days after applying the coating before using your rifle scope.

Scope coating requires some extra work. You need to sand it by hand. Cerakote C is more durable than baked H-series Ceramcoat. But if you want to save time, you can use a baked H-series cream coat instead. Don’t heat it above 160 degrees or else it could crack.

Avoid using scopes for more than 2 hours. Don’t use high temperatures.

Note: If you want to gain information about How to Sight in a Leupold Muzzleloader Scope Click HERE.

How do you Prep a Scope for Cerakote?

Cerakote is a process used to coat the exterior surface of firearms and optics. Properly applied, cerakote provides excellent corrosion resistance and wear resistance. However, if improperly applied, cerakote may crack, peel, flake off, or fade over time.

The scope needs to be cleaned. Degreasing should be done first before sanding. Sanding should be done last.

For the body of the rifle (the barrel), the sanding is done by a machine. However, for scopes, the coating is applied manually. It is important to ensure that the coating does not get too thick as it could clog up the turrets and knobs on a scope.

Cerakote is an epoxy resin used to coat metal surfaces. It’s applied by spraying or dipping. When the coating cures, it hardens into a tough finish. Cerakote is used as a protective layer on firearms, optics, and other equipment.

The parts of the scope that don’t need to have cerakote applied should be protected by wrapping them in plastic wrap or tape. This will prevent any scratches or nicks on the scope. Cerakote is an epoxy-based paint that protects the scope from scratching and nicking.
Note: If you want to know Who Makes Leatherwood Scopes? Click HERE.

How durable is Cerakote on hunting scopes?

Cerakote scopes should be coated by manufacturers. You shouldn’t do this job yourself. Any gaps in the Cerakotescope coating can dramatically reduce its lifespan.

You should practice on scrap pieces of metal before applying the Cerakote coating on your rifle scope. Cerakoting your rifle scope is very important because it protects it from scratches and other damages. Most rifle scopes have a metal casing, usually made of steel.

Cerakoting is a process used to protect firearms by applying a hard, durable, non-conductive surface coating over the exterior of a firearm component. This coating is applied as a single or multi-layer finish, depending upon the application needs. The primary function of this coating is to prevent corrosion and wear caused by moisture, salt spray, dirt, dust, etc.

Note: If you want to know How to Sight in a Nikon Buckmaster Scope Click HERE.

Can you Cerakote any Scope?

You can get just about any type of scope, rifle, or shotgun coated with Cerakotes. The main difference is the price to Cerakotes. The basic cost of cerakote scopes is $80-$150. This doesn’t include the cost of dismantling the scope and assembling it again. Additional charges for this could raise the cost to around $400 to cerakote scope does.

Cerakote or Anodize?

Anodizing protects a metal surface by creating a protective outer layer. Cerakote is a paint-like substance applied to metal surfaces. Both protectors are long-lasting.

Anodized scopes are cheaper than coated ones. However, if you want to dismantle your scope, then you need to do it before coating. You can choose either Cerakote or anodize as you wish. Consult a professional who will guide and help you based on your budget.

Hunting and shooting require high-quality optics. There are many different types available. You’ll need to know what you’re looking for before buying any new equipment.

Conclusion

We hope that now you know how to cerakote a scope.

If you want to know more information about scopes click HERE.