Table of Contents
You have the shotgun. You have the scope. But you don’t know how to mount your scope on the gun?
Don’t worry we are here to help.
How to Mount a Scope on a Shotgun Easy Steps
Scope mounting kits are available for most popular scopes. These kits include everything you need to attach your scope to your rifle or handgun.
We’ll show you how to mount your scope and save money by learning how to do it yourself.
If you want to gain a complete guide and tutorial about scopes click HERE.
Before You Start
You should always make sure you have everything you need before starting any project. This includes having the right scope, mounting system, and tools.
Verify Fitment
Shotguns come with mounts. You should be able to verify that the mount is compatible with the scope you already have. If it isn’t, then you should get another mount.
What You’ll Need
You should always use the proper tool for the job. When mounting a scope, there are many different types of mounts available.
Make sure you get the right type of mount for your rifle.
- Loctite is a brand name for an adhesive used to glue things together.
- A torx bit screwdriver is a tool used to remove screws.
- A microfiber cloth is a cleaning cloth.
- An oil/rust preventative is a product used to protect metal parts from rusting.
How to Mount a Scope on a Shotgun
You should make sure you have enough money to buy all the tools you need before starting the process. Don’t rush yourself or else you’ll end up having to pay more than what you want to spend.
Step 1: Mount the Base Use Loctite
Before installing anything else, you must first install the base of your gun. You’ll usually want to mount your gun as low as possible without contacting the barrel. Thread lockers prevent threads from loosening up over time.
You should use medium-strength Loctite when installing the base. Don’t forget to wipe down the entire gun with a microfiber cloth before applying any lubricant. Lastly, make sure you don’t scratch anything while installing the base.
Note: If you want to know How to Mount a Scope on a Marlin 336 click HERE.
Step 2: Attach the Scope and Align the Reticle
Once you’ve attached the scope, it’s time to tighten the rings down a bit. You don’t want a tight fit, because you’ll be rotating the scope next!
After mounting the scope, level your gun and adjust the reticle. Tighten the top rings. Apply a small amount of lotion to the screws to keep them in place. Make sure everything is aligned correctly before tightening the screws.
Step 3: Adjust for Eye Relief
Don’t forget to check your scope alignment before shooting. Make sure that you have enough room to avoid hitting yourself in the face. Also, make sure that you measure the right amount of recoil.
Step 4: Adjust for Eye Relief
Don’t skip this step! Find a spot where you can comfortably hold the rifle without hitting yourself in the head. Add an extra inch or two to make sure there is plenty of room for safety. Measure the distance between your shoulder and the muzzle of the gun. Make sure to account for any additional inches needed to properly fit your body.
Note: If you want to know Where are Redfield Revenge Scopes Madeclick HERE.
How to Mount Shotgun Optics?
There are three main types of optics for shotguns.
- Reflex sights are used for close-range shooting, while scopes are used for long range shooting.
- Red dot sights are used for both short and long ranges.
- Optics are most commonly found on rifles, but there are also many different types of optics available for shotguns.
Deer hunters use scopes to magnify their targets. Ultra tight chokes keep patterns narrow out to forty yards and beyond. Turkey hunters use ultra-tight chokes to keep patterns narrow out to thirty yards and beyond. Reflex sights help shooters get on target faster in a competition where seconds count.
Note: If you want to know How to Set a Rifle Scope click HERE.
How to Mount a Scope on a Shotgun?
Holographic Sights
Holographic sights are used by hunters who want to be able to see what they’re shooting without having to close their eyes. These sights are more accurate than reflex sights, but still, allow shooters to keep both eyes open while aiming.
Holographic sights are expensive, but they last longer than LED sights.
Mounting
There’s more than one way to mount an optic onto a shotgun. You should pick the method that works best for you. Your shotgun’s intended purpose will determine what kind of optic you want to put on it.
Cantilever Mount
A shotgun barrel with a cantilever rail mount attached. Hunt fish supply sells this type of barrel. You can attach a scope to it.
Shotguns are used by hunters to kill large game such as deer and wild boar. A shotgun is usually used with a long barrel to shoot birds.
Conclusion
We hope that now you know how to mount a scope on a shotgun.
If you want to know more information about scopes click HERE.
