How to Sight in a Nikon Prostaff Scope – Full Analysis, Tips & More

How to sight in a Nikon Prostaff scope is a question many people ask.

Let’s find out together!

How to Sight in a Nikon Prostaff Scope

Adjusting Windage and Elevation

Turrets adjust the height of the scope and impact the horizontal direction of the bullets. Windage adjusts the horizontal direction of the shots.

Adjusting Windage – Left and Right

Windage adjustments are performed with a turret on the right.

Left/Right impacts horizontal direction (left/ right) of the bullet.

Wind can have a large effect on the bullet trajectory. Holdover points on the reticule are used to compensate for wind.

Note: If you want to know a complete guide and tutorials about scopes click HERE.

Adjusting Elevation – Up and Down

Windage adjustment is used to adjust how far left or right the bullet goes after leaving the barrel. This is usually done by moving the crosshairs left or right. Elevation adjustment is used to adjust the height of the bullet above the ground. This is usually done using the turrets on the top of the gun.

When you shoot at different distances than what was set up when you zeroed your gun, you need to adjust the elevation turret in the “up” or “down” direction.

Sighting a Scope

Riflescopes must be adjusted for different distances. When adjusting the turrets, make sure to check them for accuracy.

How Do You Adjust A Scope?

There are three types of adjustments that you need to make for accurate shots. When combined, they allow you to bring the target to focus up, down, and left, right. You also have to adjust your eyepiece and set the magnification of your scope to what you want.

Note: If you want to gain information on How to Dial in a Scope click HERE.

Windage Adjustment

Windage is how much the bullet deviates from the centerline of the barrel. You can change this amount by adjusting the scope. A click is an increment of adjustment. Most scopes adjust by 1/2 MOa per click. That means you can adjust by half an inch left or right.

Units of measurement should be consistent throughout the entire scope.

Parallax Adjustment

Parallax adjustment is a feature that allows you to adjust how far away an object appears when viewed through your scope. This feature is useful for long-range shooting because it makes objects appear closer than they are.

Parallax adjustment corrects the error by moving the reticle closer or farther away from the target. Crosshairs do not move in any direction.

How to Focus the Eyepiece

Eyepieces should be adjusted every time you use them. If you’re using a rifle or shotgun, you’ll want to adjust your focus after each shot. This ensures that your target is always in sharp focus.

Focus on the reticle. Adjusting the focus of the eyestrain may help.

Focusing on the scope is easy. You should be able to do it without having to close your eyes.

Your eye-piece must be adjusted properly for your eyesight. Adjusting your eyepiece will help you aim faster and more accurately.

Note: If you want to gain information about Who Makes Redfield Scopes? click HERE.

Scope Adjustments

Adjusting the scope involves adjusting the windage, elevation, and parallax. After setting up the magnification for a specific range, adjust the scope’s windage, elevation, and/or parallax.

Target Turrets

Target turrets are used by people who want to shoot targets precisely. They are made smaller than other kinds of scopes because they need to be more precise. Their adjustment scales run into fractions of an inch.

Scopes that come with a target turret are not the best for shooting. A small bump or even a slight touch can set them off.

Note: If you want to know How to Paint a Rifle Scope click HERE.

Ballistic Turrets

Turrets are used by hunters and field shooters to aim and fire at targets. They are usually capped to prevent accidental adjustments while moving. They have raised turrets with markings in 100-yard increments. This makes them easier to use and more accurate than other types of turrets.

Fingertip Adjustable

Fingertip turrets are very low compared to regular turret dials. You can adjust them with a finger or thumb, without any other tools. These turrets may be available in both ballistics and target turrets.

Coin Style

Coin-style turrets are very small and narrow. They are used to shooting people. These turrets are usually found in target turrets.

Capped Turrets

These are larger-sized turrets. They can be operated by fingers or tools. After the adjustments have been made, the turrets are fitted with caps. Caps prevent accidental adjustments.

How Do You Adjust Elevation With Turrets?

Windage and Elevation turrets are adjustable by hand or with the use of tools. Small indentations indicate that the turrets require tools to turn them.

Elevation turrets are used to adjust focus. In this case, the elevation turret is used to adjust the zoom level.

How Do You Adjust Windage With Turrets?

Windage turrets work by moving the reticle up and down. The dials are usually marked as either right or left. A right windage turret moves the reticle to the right while a left windage turret moves the right to the left.

Hand-adjustable scopes use the shooter’s hands as the elevation control. Tool-adjustable scopes have an adjustment tool attached to them.

how to sight in a nikon prostaff scope

How to Sight in a Nikon Prostaff Scope?

Conclusion and Summary – Adjust Your Scope

In this blog post, we review how to make adjustments to a rifle scope to make its view shift up, down, left or right.

If you want to know more information about scopes click Here.


  • John Moses

    John is the Editor in Chief here at The Outdoor Stores. His area of expertise ensures that there is no one better to suggest which rifles are most suitable for your hunting experience. He is also available for you to contact him personally to discuss the types of animals you want to hunt and the terrain you will be hunting on. Feel free to read his posts for expert opinion on Rifles, Scopes, Rangefinders, Bonoculars and Monoculars.

Best Rifle Scopes – Top Reviews, Guide, Pros, Cons, More

You Might Be Interested In...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Might Be Interested In!