How to Mount a Scope on a Marlin Model 60 – Simple Guide & FAQs

If you want to know about Marlin Model 60 and how to mount a scope on it,

You are at the right place.

Let’s get started!

Best Scope for the Marlin

We recommend the Leupold Mark 4 3-9x40mm Rifle Scope for the Marlin 60 because it offers great performance for the price. This scope provides excellent image quality and accuracy out to 400 yards. It features a fully multi-coated lens system and comes with an adjustable magnification range of 3-9X.

History of the Marlin

The Model 60 was designed and released in 1960, and it was built using cheaper materials than the Model 99.

The Marlin 60 was an inexpensive gun that was popular among shooters because of its low price. It used a 16 groove barrel instead of the standard 18 grooves. This allowed the gun to be more affordable but also meant that it wasn’t as accurate as other guns.

The Marlin Model 60 was designed by John Moses Browning in 1894. He used a.22 caliber cartridge as the basis for this gun. The first variant of the Model 60 was introduced in 1895. This model was chambered in.30-06 Springfield. Later, Marlin added other calibers to the line-up. The most popular variant was the Marlin Model 70. This model was changed.300 Winchester Magnum. Other variants included.243 Win., 7mm Remington Magnum, 6.5x55mm Swiss, and others.

This gun is a great hunting rifle. It’s very accurate and powerful. It’s also a lot cheaper than most modern rifles.

Note: If you want to know a complete guide and tutorials about scopes click HERE.

Features

• The two guns are identical except for the number of rounds in the magazine. The first gun holds 18 rounds and the second gun holds 15 rounds. Both guns have a third screw behind the trigger guard to strengthen the stock.
• This gun is a semi-automatic weapon. It has a blowback action. The receiver is made out of metal. The receiver has a serrated, smooth finish. There is a scope mount on the receiver. The barrel is removable. The charging handle is attached to the trigger guard. The last shot bolt hold-open is automatic. The safety is located on the left side of the gun. The cross-bolt safety is located above the trigger.
• Marlin uses their proprietary Microgroove rifling in the model 60. The twist rate of this gun is 1:16 inches. The micro groove rifling reduces bullet deformation as it travels down the barrel. The Model 60 is one of Marlin’s most affordable guns. It comes with no modifications needed.
• The Model 60 was originally made for the.22 long rifle cartridge but now it’s also used for other cartridges. There are many different versions of this gun. This model is designed for the.22 long round.

Marlin Scope Mounts

A Weaver-style rail is 3/8″ wide. It accepts any set of scope rings that are made or marked to fit the Weaver rail. Scope rings can include two rings or a single-piece mount that includes two rings (a one-piece scope ring).

This model comes with a one-piece ring and a two-piece ring. We prefer the two-piece ring because it offers more adjustability during the mounting process.

Scope rings should be made thicker than the rails. Otherwise, the scope walks up and down the rail.

Note: If you want to gain information on How to Dial in a Scope click HERE.

Scope Objective Size

Scope objectives sizes are usually the last numbers seen in the typical scope specifications. For example, a 3-9×20 scope would have a 3-9 magnification and a 20mm objective. A 6-24×50 scope would have a 6-24 magnification and a 50mm objective lens.

The objective measurement is always displayed as millimeters. This number helps determine how close the scope can be mounted to the bore. A larger objective means a higher mount point.

Tube Size

Scope models built on a 1-inch tube have been around longer. They are more popular and standard tube sizes on the market today. Their weight tends to be lighter than those made on a 30 mm tube.

Scope tubes tend to be heavier than 1-inch models. A 30 mm tube weighs more than an 11 mm tube but offers a greater range of adjustment.

A 1-inch scope is better than a 30mm scope because you’ll be able to see more detail. You should also consider getting a higher magnification scope if you want to shoot closer distances.

Note: If you want to gain information about Who Makes Redfield Scopes? click HERE.

Does a Marlin have a Picatinny rail for mounting a scope?

A standard Marlin 60 is a semi-automatic rifle. It does not come with a Picatinny or Weaver rail. Aftermarket adapters are available for converting the Weaver rail into a true Picatinny.

This is a great scope for hunting. It is very lightweight and easy to use. You can adjust your settings easily. It is also very durable.

Note: If you want to know How to Paint a Rifle Scope click HERE.

How To Mount A Scope On A Marlin Model?

The marlin 60 model is an inaccurate gun, but it is effective in shooting at close range. Make sure that you do not load your gun before mounting a scope.

Weaver Style Rings

Weaver rings are very popular because you can change your scope without removing the ring. You can also use different scopes depending on what kind of shooting you do.

Picatinny Style Mounts

These mounts are designed to be used with Weaver bases. They closely resemble the weaver ring style but have a wider base slot. They are compatible with most Weaver rings. The Pica Tiny mounts are easy to use and require less effort to detach. Unlike the weaver mounting system, they do not need any tools to remove them.

Adjustability

A scope mount should be adjustable enough to allow the user to adjust the height of the scope ring. This allows the user to customize the fit of the scope ring to their specific needs.

Conclusion

Scope rings are used to mount scopes onto rifles. A scope ring is usually made out of plastic or metal and holds the scope in place.

Scope rings come in different sizes depending on what type of rifle you’re using.

If you want to know more information about scopes click Here.