How to Zero a Scope with a Mirror – Step-by-Step Instructions

There are several ways to zero your scope but…

How to zero a scope with a mirror?

Let’s find out together!

How to Zero a Scope with a Mirror?

Items Needed To Reset Your Scope:

1. Your scope
2. Screwdriver or Allen wrench depends on your scope

There are two methods to reset your scope to factory zero:

1. The mirror method
2. The counting method

Here’s How You Can Reset Your Scope?

Mirror Method

1. Put your scope flush with the mirror

A crosshair is an optical device used by marksmen to aim firearms. A crosshair is usually located near the center of the target. When the shooter aims at something, he or she looks into the eyepiece of the scope and sees the reticle. If the reticle is centered, the shooter knows that he or she is aiming directly at the target. If the reticle isn’t centered, the shooter must adjust the scope until the reticle is centered.

Note: If you want to know a complete guide about scopes click HERE.

2. Line up the shadow of the reticle with the reticle itself

Resetting to factory zero means lining up the shadow of the crosshairs with the reticle itself, which is done by adjusting the elevation and windage turrets. There is no specific way to complete this step, but it is more trial-by-fire. Keep adjusting the turrets to get the shadow and reticle aligned.

Counting Method

Here’s a step-by-step guide on you you can zero your scope:

1. You need to turn the top turret as far as it goes in one direction before you can adjust the elevation.
2. On your elevation turret, rotate it up in a clockwise direction. After reaching its maximum rotation, stop when you feel resistance. Turret may also rotate counterclockwise. Follow the direction of the arrow above the turret.
3. The number of clicks should be equal to the number of times the turret rotates in the opposite direction.
4. Divide the number you counted in half and count the clicks again. Turn the turret to the divided amount. Divide your number by 2 and for example you get 12. Then turn the elevation knob up in a clockwise direction and count the clicks again until you get 12.
5. Windage turrets should be turned clockwise or counter-clockwise until you feel resistance. Then count how many times you turn the turret before you stop. Divide that number by 2. That’s your new setting.

Note: If you want to know Who Makes UTG Scopes click HERE.

Things to Consider…

Resetting your scope to factory 0 is an important first step when using a new gun or a gun that you haven’t used for a while. You should always do this before shooting.

A scope has two main parts. First, there is the objective lens. This is what actually focuses light onto the reticle. Second, there is the eyepiece. This is what you look into to view the target. There are different types of scopes, such as reflex, tube, and riflescope.

Optic alignment takes about 5 seconds. Counting methods take longer, but less than 10 minutes.

How to Sight a Scope without Shooting?

Here’s are a few methods that could help you out:

1. Sighting scopes are used to get a better view of what you’re aiming at. You can use them when you want to see something without actually firing your gun. This method is called visual sighting.
2. Laser sights are also used to help aim.
3. Magnetic sights are used to help align your rifle or pistol.
4. Optical sights are used to help you line up your target.

Note: If you want to know How to Dial in a Scope click HERE.

Visual BoreSighting or Eyeball Boresighting – Which One is Better?

This is a simple and quick method of sighting a rifle. You will need a steady platform for stability. Your rifle must remain still while you sight it.

Sighting your scope means zeroing the scope. This means that you have aligned the cross hair with the point of your target. To do this, you must first remove the bolt, then adjust the knobs until the crosshairs line up with the point of your chosen target.

Note: If you want to gain information on How Much is a Night Vision Scope click HERE.

Conclusion

We hope that now you know how to zero a scope with a mirror.

If you’re new at this, we understand that it may seem intimidating at first, however, if you follow the instructions provided in this guide, you can do it without any hassle.

If there’s anything further you would like to know, please feel free to reach out to us.

If you want to know more information about scopes click HERE.