How to Disassemble a Rifle Scope – Step-by-Step Instructions

There are lots of questions regarding riflescopes…

How to disassemble a riflescope is one of them.

We are here to answer that…

Let’s get started!

Complete Disassembly

You should never disassemble your rifle’s scope unless you’re going to clean it or repair it. Doing so releases any gas inside the tube, making it impossible to reseal. Your rifle will no longer be waterproof or fog proof.

You should know what you’re doing before taking apart your scope. Some parts are fragile and could break if you do something wrong.

These steps are super easy. You’ll be done in no time!

Note: If you want to know a complete guide about scopes click HERE.

Some Things You Will Need

• Scope – You’ll need this to see what you’re doing. Hex wrenches – These are used to remove the scope from your rifle and free it from its rings.
• Microfiber cloths are made out of a material called polyester. Polyester is soft and flexible, but also strong. This makes them great for cleaning optics. Because they are softer than cotton, they won’t scratch or damage the lens as much.

How To Disassemble A Rifle Scope?

There are many different types of scopes available for rifles. Most of them are designed to be taken apart and put back together without any tools. This guide focuses on removing the scope from the rifle.

In the case that you’ve lost your scope, we’ll show you how to get it back to the factory settings. This is a very easy process.

Remove From Rifle

You remove the scope rings by pulling them off the mounting base. You do this by laying the rifle on its side. You then use your hex wrenches to loosen the screws holding the scope rings to the mounting base. After removing the rings, you’re finished.

Remove Rings

Scope rings should be removed before cleaning the gun. Painting the scope and removing the rings are optional. Removing the scope from the rifle is the last step.

Wipe Down

Cleaning scopes is very important. Scopes should be cleaned after every use. Use a microfiber cloth to clean them. Don’t use any abrasive material or chemicals. Start with the most sensitive part first. Then, move to the tougher parts.

Note: If you want to know Who Makes UTG Scopes click HERE.

Common Questions

A simple, inexpensive scope can be repaired easily. Don’t lose any parts, because they’re important. If you want to fix it, do it yourself.

You should always clean your rifle before shooting. Condensation build-up inside your scope could cause damage to your scope. If your scope does come with a warranty, you should contact your dealer to see what options are available.

Components of a Rifle Scope

Parts of your rifle scope go a long way in determining what needs repair. Your objective lens lets in light. Your ocular lens focuses the light onto your eye.

The objective lens focuses light on the ocular. Focus lens corrects parallax error. The Erector tube ensures that the image that reaches the eye is upright. Elevator adjustments and windage turrets ensure that the image that reaches our eyes is upright.

Magnification: The magnification level increases as the magnification lens moves towards the erector tube. Lens Coating: Multiple coatings improve the transmission of light. Minimizing glare helps you see better on a sunny day.

Note: If you want to know How to Dial in a Scope click HERE.

Importance of Fixing a Rifle Scope

A broken rifle scope can be fixed by disassembling it and fixing the problem. Reindeer are hard to hunt because they’re scattered across the land. Hunting them requires a lot of patience and luck. Missing one reindeer can cause the whole herd to scatter. You don’t want to miss any reindeer while hunting.

A rifle scope is a device used to help you aim accurately. When a scope is properly aligned and firmly fixed, it keeps the target in stable, sharp focus. A rifle with a damaged scope is almost useless. Removing a rifle scope helps determine what the problem is and takes necessary action. You should be able to identify the different parts that make a rifle scope.

Hunting is a sport that requires knowledge about the different parts of the body. You must be aware of the

Filling it with Nitrogen

Nitrogen prevents moisture from entering the scope and damaging the lens. A cloudy lens blurs the image in focus. Silica gel bags can also be used as an alternative to nitrogen. Refilling the scope is recommended by the manufacturer.

You can use a scope inside a nitrogen-filled container.

Note: If you want to gain information on How Much is a Night Vision Scope click HERE.

Clean the Lens

Use alcohol to clean the lens. Keep the lens cap on while you’re not using it. Don’t use a rag or cloth to clean your lenses. Scratch the surface of the lens could damage it.

Conclusion

Remember these steps and disassembly is going to be a piece of cake for you!

If you want to know more information about scopes click HERE.